myEKsedan

iTrader: (1)

I've searched and can't seem to find anything. Anybody have a diagram that states which wire colors go for each sensor. Im in the process of tucking the engine harness and need a diagram. The Chiltons manual only has a few wire colors not each individual one. Any help would be appreciated!!!

-Chris

egsleepercivic

helms, http://www.helminc.com/helm/homepage...&usg=AFQjCNFpm

PM'd

crx_si-r

i make them all the time from scratch. which si are you working with?

Former User

http://www.phearable.net/tech/wiring...schematics.gif

crx_si-r

OP needs to state which si he is using. EG or EM1?

Former User

Very true.

myEKsedan

iTrader: (1)

sorry im its an EM1 harness

myEKsedan

iTrader: (1)

ttt

crx_si-r

what are you having problems with? its simple. peel back some the tape or vynil loom and you can see what the wire colors are. if you want to make a brand new one you will need to make the wiring be long enough to reach from sensor, to the main branch point (i make my harnesses tuck nicely by the black box and oil filter) then make sure the wiring is long enough to reach your current ECU location.

myEKsedan

iTrader: (1)

I'm just having problems knowing which plug goes to which sensor. That's all. The whole tucking part is easy as pie!

myEKsedan

iTrader: (1)

also the harness has a couple connectors missing so i need to know what wire is signal and which wire is ground.

94eg5squadMD

iTrader: (1)

Did you ever find a site that had a diagram ?