Seat belt dash light!
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2003
Location: Ottawa, ON
Posts: 1,364
Likes: 0
Received 0 Likes
on
0 Posts
Seat belt dash light!
I'm putting in some sparco's and transfering over the stock seat belt connector to the rails, will the seat belt dash light stay on after I remove the factor seats? I have heated leather seats in my 4dr Acura 1.6EL, which is basically a 4dr civic EX. There is a small wiring harness on the seat that will come out with it, as i have to unclip that portion to remove the factory seat.
Thanks
Thanks
#2
Re: Seat belt dash light! (ELSpool)
if im not mistaken your seatbelt light won't come on if that plug is disconnected. but the seatbelt light won't function for its intended purpose either. so basically if you have that plug disconnected, and the car is on with the seat belt not plugged in the seatbelt light wont come on.
#5
Re: (pdiggitydogg)
If you are swappin the seat belt connector, the light shouldn't be an issue. As long as you swap it out and plug it back like it was, should be fine. Your heated option will be lost of course... lol
Thread
Thread Starter
Forum
Replies
Last Post