chadleehonda

Alrighty where to begin...I have a 95 Civic Ex Converted to manual..so i took the automatic guage cluster out and put a manual cluster from 93 civic..only thing is on the 93 cluster there is no rpm unlike the auto..so i have a extra plug for rpm guage..so i bought autometer rpm tach with shift light and wanna know if i cut the plug off which wires would i use to splice into the rpm tach

Targa250R

Just put the automatic cluster back in and remove the bulbs from the PRND tree.

chadleehonda

i dont like the fact it has prnd12...i wanted these guages becuase i wanted my rpm tach on the dash not in the cluster

chinochanginc

so get a 92 - 95 cluster with the tach, and take the tach out, and put it in your current cluster

Targa250R

The PRND tree looks a whole lot cleaner than a giant stunnerific Autometer monster tach bolted to the dash . . .

ek9phantom

THERS IS A BLUE WIRE ON THE DRIVERSIDE CORNER OF THE ENGINE BAY THAT YOU CAN TAP IN TO FOR THE TACH SIGNAL. ITS A LONELY BLUE WIRE WITH A RUBBER LIKE END TO SPLICE IN AND PRESTO YOUR TACH WILL WORK