rod bearing (acl,itm,king) which is better
08-18-2007, 06:43 PM
#3
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: rod bearing (geebs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by geebs »</TD></TR><TR><TD CLASS="quote">oem honda</TD></TR></TABLE>
x2.
"even f1 racers use honda bearings in their race cars."
SCC magazine
Honda's oem spec threshold for their bearings is very strict. It's one of the reasons our motors last so long.
x2.
"even f1 racers use honda bearings in their race cars."
SCC magazine
Honda's oem spec threshold for their bearings is very strict. It's one of the reasons our motors last so long.
08-18-2007, 08:15 PM
#4
Guest
Posts: n/a
Re: rod bearing (ek forever guy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek forever guy »</TD></TR><TR><TD CLASS="quote">x2.
"even f1 racers use honda bearings in their race cars."
SCC magazine
Honda's oem spec threshold for their bearings is very strict. It's one of the reasons our motors last so long.</TD></TR></TABLE>
nascar sbc's not f1 cars
"even f1 racers use honda bearings in their race cars."
SCC magazine
Honda's oem spec threshold for their bearings is very strict. It's one of the reasons our motors last so long.</TD></TR></TABLE>
nascar sbc's not f1 cars
08-18-2007, 08:18 PM
#5
Ek Forever y0!
Join Date: May 2005
Location: Beating people with a stick, GA
Posts: 16,712
Likes: 0
Received 6 Likes
on
6 Posts
Re: rod bearing (k powered ej1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by k powered ej1 »</TD></TR><TR><TD CLASS="quote">nascar sbc's not f1 cars </TD></TR></TABLE>
You could be right. It's been a while since I read the article. I'll have to take a look at it.
EDIT: Nope, the guy from Endyn who was interviewed in the article says it was Formula cars.
It could easily be both.
You could be right. It's been a while since I read the article. I'll have to take a look at it.
EDIT: Nope, the guy from Endyn who was interviewed in the article says it was Formula cars.
It could easily be both.
08-18-2007, 08:19 PM
#6
Honda-Tech Member
Join Date: Jun 2005
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
Re: rod bearing (k powered ej1)
of course OEM is better but Earl once told me that ACL is quality bearing and he swears by it.
I would say use ACL bearings and spec out the clearance with a plastigage and the ones that falls out of specs, order from OEM Honda. My 2 cents. Thats what i did and its been running strong for 2 years now.
I would say use ACL bearings and spec out the clearance with a plastigage and the ones that falls out of specs, order from OEM Honda. My 2 cents. Thats what i did and its been running strong for 2 years now.
Thread
Thread Starter
Forum
Replies
Last Post
92integraVTECgsr
All Motor / Naturally Aspirated
11
03-24-2006 10:52 AM
