revs sticking... done checks, still the same?
07-05-2007, 09:19 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2006
Posts: 83
Likes: 0
Received 0 Likes
on
0 Posts
revs sticking... done checks, still the same?
i have some problems on a d16z6 basically i have the common rev's sticking problem, when i come to pull up at a junction the revs hang at about 2k and then drop down to right level and the choke doenst kick in on a cold start up aswell
cleaned the IACV, screwed the white plastic thing in the FITV and checked the PCV valve, and dont seem to have a vacum leak
any ideas what else it could be?
cleaned the IACV, screwed the white plastic thing in the FITV and checked the PCV valve, and dont seem to have a vacum leak
any ideas what else it could be?
07-05-2007, 09:41 AM
#2
Honda-Tech Member
Join Date: Mar 2006
Location: charlotte, nc, usa
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
Re: revs sticking... done checks, still the same? (60019184)
did you remove the intake manifold or mess with the throttle body at all? i had this problem when i installed a new IM but it was the throttle cable, not enough slack between TB and the pedal.
Thread
Thread Starter
Forum
Replies
Last Post
wes7side5o
Honda Civic / Del Sol (1992 - 2000)
15
03-16-2007 06:47 AM
bumthology
Honda CRX / EF Civic (1988 - 1991)
3
01-13-2006 09:06 AM