Reuse old hub with a few small gouges?
04-08-2014, 12:04 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Los angeles, Ca, USA
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
Reuse old hub with a few small gouges?
In the process of replacing the two front wheel bearings on my 93 civic hb cx and managed to gouge the surface of the hub multiple times with a wheel bearing splitter when removing the bearing race. Would there be any issue if I reused the hub? Any help would be appreciated.
Last edited by JohnnyEF; 04-08-2014 at 12:08 PM. Reason: .
04-08-2014, 12:34 PM
#3
Honda-Tech Member
Re: Reuse old hub with a few small gouges?
like kyden said, its ok but i would give it a quick smoothing with a piece of emery cloth to make sure there are no burrs that could cause issue with the new bearing
04-09-2014, 10:16 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Nov 2001
Location: Los angeles, Ca, USA
Posts: 1,160
Likes: 0
Received 0 Likes
on
0 Posts
Re: Reuse old hub with a few small gouges?
Thread
Thread Starter
Forum
Replies
Last Post
JohnnyEF
Honda Civic / Del Sol (1992 - 2000)
10
04-10-2014 09:08 AM
new_climber
Honda Civic / Del Sol (1992 - 2000)
13
06-05-2011 08:10 AM
z6hatchboy
Honda Civic / Del Sol (1992 - 2000)
2
02-06-2009 06:31 PM
Bnjmn
Honda Civic / Del Sol (1992 - 2000)
3
09-20-2005 03:43 PM
