Replacing 98 Civic power window regulator?
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Long Island, NY, US
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
Replacing 98 Civic power window regulator?
The car already has power windows but the drivers side motor is starting to go. Is this just a simple swap type of install? I'm assuming I'd just remove any bolts/screws and slap a new one in place of the old one?
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Long Island, NY, US
Posts: 1,678
Likes: 0
Received 0 Likes
on
0 Posts
Re: Replacing 98 Civic power window regulator? (tech8)
It's a coupe.
I haven't looked much, but they have some on fleabay for about $60 shipped
I haven't looked much, but they have some on fleabay for about $60 shipped
#5
Re: Replacing 98 Civic power window regulator? (loki2323)
Here is a Technical Service Bulletin (TSB) which shows how the window regulator is.
http://www.tegger.com/hondafaq...e.pdf
You should check that the power window switch is okay before you replace the window regulator. Also, try cleaning the rubber channels with q-tips and rubber alcohol, and then apply silicone grease or spray to the rubber channels; this may help the windows go up and down easier.
http://www.tegger.com/hondafaq...e.pdf
You should check that the power window switch is okay before you replace the window regulator. Also, try cleaning the rubber channels with q-tips and rubber alcohol, and then apply silicone grease or spray to the rubber channels; this may help the windows go up and down easier.
Thread
Thread Starter
Forum
Replies
Last Post
Mike's Honda
Honda Civic / Del Sol (1992 - 2000)
1
12-17-2017 03:50 PM
gqskrub
Honda Civic / Del Sol (1992 - 2000)
4
04-19-2016 06:43 PM
98civ98
Honda Civic / Del Sol (1992 - 2000)
4
02-04-2014 02:40 PM