Quick throttle body question Need quick response.
#1
Thread Starter
Join Date: Jul 2003
Location: Somewhere in, IL
Posts: 1,548
Likes: 0
Received 0 Likes
on
0 Posts
Quick throttle body question Need quick response.
I just bought a str throttle body and am Installing it as we speak. I removed my old tb and put the str on and put all the hoses back where they were. My problem: When I go to start the car it cranks then shuts off. If I crank the car on and press the gas pedal it starts to run but as soon as I release gas pedal it shuts off again. No codes yet I had to adjust the throttle cable to get the pin in the throttle body. Now I just can't get it to idle and stay on.
#2
Thread Starter
Join Date: Jul 2003
Location: Somewhere in, IL
Posts: 1,548
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quick throttle body question Need quick response. (Jdmbsixteen)
When the gas is not being pressed the throttle plate should remain fully closed or should it be open a little?
#3
Honda-Tech Member
Join Date: Feb 2003
Location: SoCal
Posts: 2,669
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quick throttle body question Need quick response. (Jdmbsixteen)
make sure everything is on right, if nothing works then i would try to put my stock one on and see what happens
ps: what TB were u using before
make sure the TPS has the right voltage
ps: what TB were u using before
make sure the TPS has the right voltage
#4
Thread Starter
Join Date: Jul 2003
Location: Somewhere in, IL
Posts: 1,548
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quick throttle body question Need quick response. (ConvoyPMR)
Where do the throttle nuts have to be all the way on the end. The car will not even Idle
#5
Honda-Tech Member
Join Date: Jan 2002
Location: Raleigh, NC
Posts: 15,334
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quick throttle body question Need quick response. (Jdmbsixteen)
Sounds like your TB isnt open at all at idle. Try adjusting your idle screw so that it will at least run. Adjust down to where your idle should be once you get it started.
#7
Re: Quick throttle body question Need quick response. (ConvoyPMR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ConvoyPMR »</TD></TR><TR><TD CLASS="quote">
make sure the TPS has the right voltage</TD></TR></TABLE>
also check the adjustor screw, they owned my *** for awhile, damn gremlins..
make sure the TPS has the right voltage</TD></TR></TABLE>
also check the adjustor screw, they owned my *** for awhile, damn gremlins..
Trending Topics
#8
Thread Starter
Join Date: Jul 2003
Location: Somewhere in, IL
Posts: 1,548
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quick throttle body question Need quick response. (EGtoDC2)
bump still no luck I checked the screw and the voltage both are good. I start the car without the throttle body on and it ran fine.... what am I doing wrong. It just starts then stops.
#11
Junior Member
Join Date: Sep 2003
Location: Thiensville, WI
Posts: 490
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quick throttle body question Need quick response. (Jdmbsixteen)
It should look closed when it is at idle. This is a pic of mine at idle
What does your car do when you start it?
What does your car do when you start it?
#14
Honda-Tech Member
Join Date: Oct 2002
Location: Tampa
Posts: 5,401
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Jdmbsixteen)
does the STR have an idle adjusting screw? how about all the air passages used to let it idle correctly? seems like theres no air getting through at all.....
STR Instructions......
http://www.strspeedlab.com/Inst/TB/tbc.html
STR Instructions......
http://www.strspeedlab.com/Inst/TB/tbc.html
#15
Honda-Tech Member
Join Date: Nov 2003
Location: salem, or, usa
Posts: 1,307
Likes: 0
Received 0 Likes
on
0 Posts
Re: (n3rdsp0rts)
Yeah, adjust the idle adjuster screw if there is one, there should be? I believe you turn it clockwise to adjust the idle up, and counter for down! This should do it!
#17
Thread Starter
Join Date: Jul 2003
Location: Somewhere in, IL
Posts: 1,548
Likes: 0
Received 0 Likes
on
0 Posts
Re: Quick throttle body question Need quick response. (Jdmbsixteen)
I fixed it I wasn't getting an accurate reading from the map sensor. Thanks for the help guys.
Thread
Thread Starter
Forum
Replies
Last Post
muddmonky
Honda Civic / Del Sol (1992 - 2000)
1
12-22-2012 05:36 PM
Mr. JDM-GSR
Honda Civic / Del Sol (1992 - 2000)
4
08-29-2005 11:33 AM