Question 2.5" collector pipe to 2.3" exhaust on d16 will it work?
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2010
Location: On The REG
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Question 2.5" collector pipe to 2.3" exhaust on d16 will it work?
Running a WSII exhaust 60mm, about 2.3" catback exhaust with a 2.5" High Flow cat and stock y8 exhaust manifold. Im lookin at getting the Tri Y header 4-2-1 that rins to a 2.5" collector pipe. Will this require me to increase the size of my exhaust system?
Going to be running a stage 2 ZEX Cam in december with springs and retainers
Going to be running a stage 2 ZEX Cam in december with springs and retainers
#4
Honda-Tech Member
Thread Starter
Join Date: Sep 2010
Location: On The REG
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question 2.5" collector pipe to 2.3" exhaust on d16 will it work?
So your saying I would have to increase the pipe size of the system? I cant have the drop from 2.5" collector to 2.3" catback?
#7
Honda-Tech Member
Thread Starter
Join Date: Sep 2010
Location: On The REG
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question 2.5" collector pipe to 2.3" exhaust on d16 will it work?
2.5 inch custom made intake. Mandrel bent pipe cut into proper pieces to run, coated with textured heat resistant paint on outer surface and gloss heat resistance pain on inner with K&N filter. During winter, pipe stays cool with driving all day, different story in summer. 100 degrees out here in summer
Also running upgraded fuel system at a higher pressure with a GSR throttle body and ported intake
Also running upgraded fuel system at a higher pressure with a GSR throttle body and ported intake
Thread
Thread Starter
Forum
Replies
Last Post
scooby_dooby_doo
Acura Integra
5
08-30-2002 10:05 AM