Putting on oil pan gasket dry?
03-10-2015, 11:32 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Jul 2013
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Putting on oil pan gasket dry?
Have a 94 honda civic ex that will need the oil pan gasket replaced. Went to the parts store to get what i need and when asked about what type of RTV silicone to use he told me that because it is a rubber gasket that it should be installed dry. Anyone have experience with this?
03-10-2015, 12:35 PM
#3
Re: Putting on oil pan gasket dry?
Not totally true. There are spots that use Honda Bond/Flange Sealant.
Permatex "The Right Stuff" Grey is the same thing. Black will work too but imports is grey.
It's mainly the corners of the gasket that encircle the crank shaft.
Same thing is done on the valve cover gasket.
Permatex "The Right Stuff" Grey is the same thing. Black will work too but imports is grey.
It's mainly the corners of the gasket that encircle the crank shaft.
Same thing is done on the valve cover gasket.
Thread
Thread Starter
Forum
Replies
Last Post
dth0ng69
Honda Civic / Del Sol (1992 - 2000)
9
07-14-2009 08:28 PM
teler86
Honda CRX / EF Civic (1988 - 1991)
14
05-18-2006 05:18 AM