pm7 pistons in y8 block
#1
pm7 pistons in y8 block
I'm looking rebuild the motor in my 98 si and try to get a little more torque out of it..
I have both zc block with DOHC head (practically identical to ls head)
and i have a full y8 block & sohc vtech head out of my motor ...
so the idea is to use the pm7 pistons & rods in the y8 block with the sohc head... and get a cheap high compression block..
however compression will be close to 13; ... so believe i need thick gasket to get it down to 12 or 11...
what do you guys think..
has anyone done this ... any recommendations?
thanks
I have both zc block with DOHC head (practically identical to ls head)
and i have a full y8 block & sohc vtech head out of my motor ...
so the idea is to use the pm7 pistons & rods in the y8 block with the sohc head... and get a cheap high compression block..
however compression will be close to 13; ... so believe i need thick gasket to get it down to 12 or 11...
what do you guys think..
has anyone done this ... any recommendations?
thanks
Thread
Thread Starter
Forum
Replies
Last Post
Toptul_Honda
Honda CRX / EF Civic (1988 - 1991)
9
11-13-2003 08:59 PM