Please don't tell me that its my clutch
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Houston, Tx, USA
Posts: 4,804
Likes: 0
Received 0 Likes
on
0 Posts
Please don't tell me that its my clutch
I've noticed and it is very annoying.
Sometimes when i press the clutch, it makes a loud soouuuup noise.
sometimes when i press the clutch, it makes a clicking noise towards the bitting point.
sometimes it makes the clicking noise all the way when i press the clutch
The car's milage just moved up to the 76K mark.
Its a 96 honda civic ex.
please help.
[Modified by sshaikh01, 3:19 AM 4/9/2002]
Sometimes when i press the clutch, it makes a loud soouuuup noise.
sometimes when i press the clutch, it makes a clicking noise towards the bitting point.
sometimes it makes the clicking noise all the way when i press the clutch
The car's milage just moved up to the 76K mark.
Its a 96 honda civic ex.
please help.
[Modified by sshaikh01, 3:19 AM 4/9/2002]
#2
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Houston, Tx, USA
Posts: 4,804
Likes: 0
Received 0 Likes
on
0 Posts
Re: Please don't tell me that its my clutch (sshaikh01)
Also, mostly when the car is cold.
When i let off the clutch and rpms are below 2,500 the car jerks, jerks hard.
[Modified by sshaikh01, 3:27 AM 4/8/2002]
When i let off the clutch and rpms are below 2,500 the car jerks, jerks hard.
[Modified by sshaikh01, 3:27 AM 4/8/2002]
#3
Honda-Tech Member
Join Date: Oct 2001
Location: san diego, ca, usa
Posts: 2,330
Likes: 0
Received 0 Likes
on
0 Posts
Re: Please don't tell me that its my clutch (sshaikh01)
it might be ur pressure plates making noise. but it stop after car is at normal temperature.
#6
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2001
Location: Providence, RI, USA
Posts: 1,654
Likes: 0
Received 0 Likes
on
0 Posts
Re: Please don't tell me that its my clutch (Ignitecivic)
could be a pressure plate or a throw out bearing. Either way, sounds like it needs some investigating before something fails.
I have a stock pressure plate from a D16Z6, good condition if you're interested. Stock flywheel too if you want one to resurface before you pull everything apart. Let me know.
Nate
iamn8@hotmail.com
[Modified by 94CivicSi, 7:37 PM 4/9/2002]
I have a stock pressure plate from a D16Z6, good condition if you're interested. Stock flywheel too if you want one to resurface before you pull everything apart. Let me know.
Nate
iamn8@hotmail.com
[Modified by 94CivicSi, 7:37 PM 4/9/2002]
Thread
Thread Starter
Forum
Replies
Last Post