If anybody could find(i could not) a pic of a OBD1 P72 ECU wired for vtec.
I would like a reference picture to help me out. i know where to wire it and what to wire but not really sure how it should look. also pictures of the sensors the wires run to would be great.
IAB COLOR(A17)* isn't that the charcoal/vapor canister?
No its the IAB solenoid and vacuum chamber
if you are using an aftermarket intake manifold you won't need the IAB wiring and you can just use the OBD1 VTEC subharness I sell, plus its cheaper. It includes all the wiring and connectors needed to basically plug and play. No need to chip the ECU as it won't throw a check engine light for the missing IAB's.
__________________ OBD1/2 SOHC/DOHC VTEC HARNESS
MINI ME SUBHARNESS
02 EXTENSION HARNESSHondapartshero.net
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.