sgtroseberry

well i got the EK password fog lights and everything is hooked up but i keep blowing my insturment fuse? and the fogs will not work, just replaced the relay, maybe its not grounded right or something. any help wold be awsome. and i searched

RedEj8

Which fuse is blowing? The one supplied with the kit? Or the fuse for the guage cluster?..make sure where the plugs are going from the harness to the plugs going to the lights are matched up right, i had a problem with that where the wires were reversed in the plug so ground was going to power and blowing that fuse(make sure black is going to black and blue is going to blue on both sides).

sgtroseberry

its blowing the one in the fuse panel to the car. i will check the wires tommorow

Eran

iTrader: (1)

Well, you should have an inline fuse ... so it's wierd that you're not blowing that. Check all your grounds, and check your inline fuse.

Also, make sure your accessory plugs are in the right spots.

sgtroseberry

hasn't blown the inline fuse just the one in the fuse box, checked the wires at the light and there is only one way it can go in. the light is on at the fog light switch, where is a good ground for both of them? there is on in the engine bay and one in the car.

Eran

iTrader: (1)

I bolted my in-dash ground to the metal knee bolster, and I bolted my engine bay ground to my radiator support. Do you have a 99-00 or a 96-98? LMK, and I'll try to help you make sure all your wires are in place.

sgtroseberry

i have a 99ek and that is where everything is bolted to, the knee bolster and not the rad support but the onne in the engine bay is at the engine ground.

RedEj8

Yea make sure the little brown plug that plugs into the fuse box is in the right place. I believe its the 3rd or 4th spot..at least it is for a 97

Eran

iTrader: (1)

For a 99 it's the 5th spot.