parts list needed...timing belt, water pump changing
#2
Honda-Tech Member
Re: parts list needed...timing belt, water pump changing (idriveadelsol7)
I hear it was smart to replace the tensioner also.
I bought a T-belt kit from prostreetonline. Thats whats included in theirs. Since you have to remove the valve cover, check that rubber gasket. If it looks bad, replace it. If its fine, leave it.
I bought a T-belt kit from prostreetonline. Thats whats included in theirs. Since you have to remove the valve cover, check that rubber gasket. If it looks bad, replace it. If its fine, leave it.
#3
Honda-Tech Member
Join Date: Aug 2003
Location: ca, usa
Posts: 2,242
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts list needed...timing belt, water pump changing (dohcdelsol)
you should replace the timing belt, water pump, and the tensioner.. i just did mine a few months ago... really easy if u have an impact gun, if not the crank bolt is fun to get off oh yea, and when removing the lower mount.. dont use the gun on it... mine tore to shreds. .it was only like $10 for a new one,.. but still..
good luck
good luck
#6
Honda-Tech Member
Re: parts list needed...timing belt, water pump changing (idriveadelsol7)
timing belt, all of your outer belts, water pump, cam seal, crank seal, valve cover gasket set (should also include gromets and plug tube seals; you also want to remember grey RTV sealer on the corners of the vc gasket) thermostat (don't forget the o-ring). unless the tensioner is making noise you can reuse it. btw this is what you would get if you had it done at the dealership.
#7
Thread Starter
Join Date: Mar 2005
Location: Los AngeLes, Ca
Posts: 1,356
Likes: 0
Received 0 Likes
on
0 Posts
Re: parts list needed...timing belt, water pump changing (hondamark35)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondamark35 »</TD></TR><TR><TD CLASS="quote">timing belt, all of your outer belts, water pump, cam seal, crank seal, valve cover gasket set (should also include gromets and plug tube seals; you also want to remember grey RTV sealer on the corners of the vc gasket) thermostat (don't forget the o-ring). unless the tensioner is making noise you can reuse it. btw this is what you would get if you had it done at the dealership. </TD></TR></TABLE>
exactly what i needed...
exactly what i needed...
Thread
Thread Starter
Forum
Replies
Last Post
TougeCoupe
Honda CRX / EF Civic (1988 - 1991)
9
11-19-2009 03:56 AM
dELfONiK
Honda Prelude
2
02-21-2006 06:37 AM
B18Redline
Acura Integra
4
11-06-2004 10:26 AM
Origin
Honda CRX / EF Civic (1988 - 1991)
8
11-15-2003 09:33 PM