turbo question...
12-22-2010, 07:59 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2008
Location: Lawrenceville, GA
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
turbo question...
I got this turbo in a trade, the guy I got it from said he didnt know anything about it, he got it from a friend.. blah blah..
anyways, im guessing its off eBay.. it says "DSM-EVOIII" on type it says "T3"..its a pretty small turbo, brand new..
just wondering if anyone has used it? any info on it? A/R, trim, what kind of power it can make, etc..
thanks!
anyways, im guessing its off eBay.. it says "DSM-EVOIII" on type it says "T3"..its a pretty small turbo, brand new..
just wondering if anyone has used it? any info on it? A/R, trim, what kind of power it can make, etc..
thanks!
12-22-2010, 08:05 AM
#2
Honda-Tech Member
Join Date: Dec 2010
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo question...
Its a t3 flange, a/r is usually around 50 for a 16g turbo turbine wheel is usually 56mm. This turbo doesnt have a internally wastegate so you will need an external. The turbo itself is good for about 350whp, but it all depends on supporting mods and what engine application it is for.
12-22-2010, 08:09 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Dec 2008
Location: Lawrenceville, GA
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo question...
Its a t3 flange, a/r is usually around 50 for a 16g turbo turbine wheel is usually 56mm. This turbo doesnt have a internally wastegate so you will need an external. The turbo itself is good for about 350whp, but it all depends on supporting mods and what engine application it is for.
12-22-2010, 08:13 AM
#4
Honda-Tech Member
Thread Starter
Join Date: Dec 2008
Location: Lawrenceville, GA
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo question...
Its a t3 flange, a/r is usually around 50 for a 16g turbo turbine wheel is usually 56mm. This turbo doesnt have a internally wastegate so you will need an external. The turbo itself is good for about 350whp, but it all depends on supporting mods and what engine application it is for.
12-22-2010, 08:41 AM
#5
Honda-Tech Member
Join Date: Apr 2007
Location: Phoenix, AZ, USA
Posts: 589
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post