Noise from water pump area!!
09-03-2006, 10:25 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: Chronic and Palm Trees, Ca
Posts: 1,159
Likes: 0
Received 0 Likes
on
0 Posts
Noise from water pump area!!
Motor makes a skreeching sound from water pump/timing belt area. water pump side of timing belt seems to shake. Noise gets louder as i accelerate and seems to come to come and go in cycle when at idle.Had a slight whine before but as of yesterday has turned into a loud screech. Is it bad water pump? does bad water pump make screeching sound? any suggestions would be great. Need to get rid of this noise.
09-03-2006, 11:25 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: Chronic and Palm Trees, Ca
Posts: 1,159
Likes: 0
Received 0 Likes
on
0 Posts
Re: Noise from water pump area!! (Luserkid)
aite sounds like i need new water pump. havnt noticed any leaking of coolant but seem to be low everytime i check. thanks for the help
09-06-2006, 08:42 AM
#5
Honda-Tech Member
Thread Starter
Join Date: Mar 2004
Location: Chronic and Palm Trees, Ca
Posts: 1,159
Likes: 0
Received 0 Likes
on
0 Posts
aite still making crazy noise! changed watr pump and tensioner, not getting anymore whine or jumpy timing belt but still have screeching/metal griniding noise coming from left of motor.Cant pin point where its coming from. seems to increase with rpm and goes away after idleing for a few seconds. need help!
09-06-2006, 02:55 PM
#7
Re: (Gmoney16)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gmoney16 »</TD></TR><TR><TD CLASS="quote">bump.. need this noise gone! anybody?</TD></TR></TABLE>
So you've already replaced the timing belt and waterpump and the noise is still there?
Drain your oil and see if there's metal shavings in the oil.. If so most likely you have a spun rod bearing.. That's all i can think of maybe someone else will chime in
Goodluck
So you've already replaced the timing belt and waterpump and the noise is still there?
Drain your oil and see if there's metal shavings in the oil.. If so most likely you have a spun rod bearing.. That's all i can think of maybe someone else will chime in
Goodluck
Thread
Thread Starter
Forum
Replies
Last Post
fryman
Honda Civic / Del Sol (1992 - 2000)
7
08-22-2008 10:31 AM
