WHORE: JDMCoveralls

I just got a new toy... An AutoXray EzLink Automotive Diagnostic System.. Its just the OBDII Generic Asian Euro Domestic...

So I have one question: I am about to scan my 2000 Civic Si and I dont know where the plug is located on my car to connect to the EzLink? Since I didnt get a manual with my new toy because I bought it new, I dont know where it is located...

Can anyone help me with this...
And is there anything I should know before using this tool...
I already know the basics of it...

Thanks in advance!
JDMatters

SkankyEJ7

lay down under your steeringwheel and you should see it, near the fuses

WHORE: JDMCoveralls

K thanks BRB!

JDMatters

anony95ex

All OBDII connectors, by law, have to be located within 20 inches of the steering wheel and be accessible with no tools. I don't know about your Civic in particular, but Honda does put them in wierd places sometimes. Most manufacturers (and some Hondas) have the connector located under the steering column, above the driver's feet somewhere. Other Hondas have them located behind the ash tray. Yet other Hondas have them on the passenger side, under the glove box against the center console. Just look around, you'll find it.

Usually Honda does put a sticker on the underside of the steering column that says something like "OBDII CONNECTOR LOCATED..."

WHORE: JDMCoveralls

I got it thanks 98ekhx and anony95ex for the help finding it...
BTW the codes it ran were:

P0118 Engine CoolantTemperature Citcuit High Input
P0013 Intake Air Temperature Circuit High Input

What does the High Input mean?

Thanks
JDMatters