need info ABS vs non-ABS wheel hubs & bearings for civic / integra antilock brakes
Trying to get all my ducks in a row here & need help
most common brake swap is integra/civic ex.... a large percentage were originally antilock braking system.
there are different part # for front & rear hubs & bearings for the same brakes depending if they are ABS or non ABS.
question 1.) are the bearings & therefore the (inside of) the hubs different sizes? I assume there is somesort of magenetic pickup or something in the bearings for ABS system - correct or no?
question #2) if they are different sizes & I want new ones (both bearings & hubs) can I just get non-abs bearings with non-abs hubs? if i needed just bearings i would go with abs bearings but the rears are all sold as a hub/bearing assembly
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.