Meltdown!
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Lowell, Ma, Usa
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Meltdown!
Okay guyz, i have a 99 Civic EX and itz dropped. i just recently installed my skunk2 exhaust and now my bumper is starting to melt little by little everytime i drive it to work. do you guyz know what i should do to prevent that from happening..? my friend gave me one idea and thatz cutting the bumper so the exhaust tip wont touch it. any other ideas or suggestions...?
#2
Honda-Tech Member
Join Date: Apr 2007
Location: Columbus, Ohio
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Re: Meltdown! (CivicKGC)
your muffler is getting hot and its melting your bumber. either someone who bended it did a shitty job or just got a wrong axelback or hangers are to small.. but yea if i was you. i take it off and get the one that fits without touching your bumber. you wouldn't want to cut up a nice OEM bumber.. it will just look like **** and very noticable
#3
Honda-Tech Member
Join Date: Nov 2005
Location: Pittsburgh, PA
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Re: Meltdown! (CivicKGC)
maybe try bending the hangers on the muffler slightly so it's no resting directly against it....or just deal with it i guess, i wouldnt cut it i'd rather have mine melt at that point.
#5
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Lowell, Ma, Usa
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Meltdown! (forcefedferio)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NOman0608 »</TD></TR><TR><TD CLASS="quote"> you wouldn't want to cut up a nice OEM bumber.. it will just look like **** and very noticable</TD></TR></TABLE>
well the bumper isn't in perfect condition, not even in a good condition. cuz therez a crack right dab in the middle.
so i might cut it, smooth it out, and maybe post a picture up after itz done. what do you guyz think?
well the bumper isn't in perfect condition, not even in a good condition. cuz therez a crack right dab in the middle.
so i might cut it, smooth it out, and maybe post a picture up after itz done. what do you guyz think?
#6
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Lowell, Ma, Usa
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: Meltdown! (forcefedferio)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by forcefedferio »</TD></TR><TR><TD CLASS="quote">maybe try bending the hangers on the muffler slightly so it's no resting directly against it....or just deal with it i guess, i wouldnt cut it i'd rather have mine melt at that point.</TD></TR></TABLE>
yeah i'll try doing that too
yeah i'll try doing that too
Thread
Thread Starter
Forum
Replies
Last Post
EMphaticONE
Honda Civic / Del Sol (1992 - 2000)
2
10-26-2004 10:05 PM