MAP sensor on 89 crx mini me swap
#1
Thread Starter
Join Date: Aug 2003
Location: Trapped in this little Black Box
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
MAP sensor on 89 crx mini me swap
I'm having massive issures with my map sensor. there are 3 wires... yellow red/green and white brown.
+5v -5v and data....
anyway... ive hooked it according to the pinouts but i cant get the map code to clear.. code 3
It is a 89 crx with a A6 block and a y8 head.
I spliced the harness and this is the only code remaining.... since ive converted to odb1.
I ran 3 NEW wires to the map and now am confused about the pinnouts because the write ups say the hasport manual is wrong.. which do i use?
Pinns 21,19 ,17 on d connector of the obd 1 ecu are the map pinns im using...
-x m d
+5v -5v and data....
anyway... ive hooked it according to the pinouts but i cant get the map code to clear.. code 3
It is a 89 crx with a A6 block and a y8 head.
I spliced the harness and this is the only code remaining.... since ive converted to odb1.
I ran 3 NEW wires to the map and now am confused about the pinnouts because the write ups say the hasport manual is wrong.. which do i use?
Pinns 21,19 ,17 on d connector of the obd 1 ecu are the map pinns im using...
-x m d
#2
Honda-Tech Member
Re: MAP sensor on 89 crx mini me swap (xmd)
I installed a d16z6 and convereted into obd1 in a 89 civic DX hb. I didn't have to modify or move any of the map sensor pins at all. But i used a OBD0 to OBD1 jumper harness after converting from dual point to multiport injection. What electrical manual are you using?
Thread
Thread Starter
Forum
Replies
Last Post