oneEg1Tc

I have a 95 dx with manual windows, tryin to swap it to power windows what parts needed or any special wirring ? How difficult is it ?

fryman

You'll need:

electric window regulators for each door

window switches for each door

wire harnesses for each door

electric window door panels for each door

a floor wire harness

fuses to put in the fuse box for each window

That should be about it unless you plan to also convert to power mirrors and locks.
And it is definitely not an easy job but I did it to my car with no problems and its worth the work.

oneEg1Tc

Well I'm gettin a pair of ex doors with everything included just not the harness, but could minime it right ?

fryman

You're saying they don't come with the floor harness right?
And by minime it you mean make you're own harness?

oneEg1Tc

Correct no floor harness

fryman

Oh,well yea you can just make your own.
That's what I did since the junk yard wanted $150 for it because they said its so much work to get it out.
I bought 5 rolls of 16 gauge wire from advance auto for about $27 and a few other things so when I bought everything it was around $50 that I spent on my home made harness.
And I have a 4 door so it should cost even less for you to make one.

fryman

Also you'll need the part of the harness that clips into the back of the fuse box and the 2 ends of the wire harnesses for each door and then you just solder everything,shrink tube it and wrap the wires in electrical tape.

fryman

Sorry to triple post but you can also get this:
http://cgi.ebay.com/ebaymotors/92-95...Q5fAccessories

oneEg1Tc

np rthanks I appreciated it , well I think I'm doing my doors first then the mirrors ,

t0ny

heres a write up : https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/92-95-civic-power-door-conversion-right-way-tons-pics-end-all-swap-2337026/