rippintec

ok so i have a ls/vtec that im trying to swap into my 99 civic ex. so far i have a p72 gsr ecu alternator off 99 gsr and wiring harness off same gsr. my questions are which t bracket do i need and which wiring harness do i need? cuurently the car has a d16z6 which i believe has all the old stuff (ecu is a p2p, injectors, harness, and alternator from the motor which originally came in the car.

94EG8

You'll need to reuse the EX harness and add the wiring for the IABs if you want them to work, you will also need to swap the distributor plug. If it was me i'd get the plugs off a '96 - '98 Y7 harness, its kind of a waste to cut up a good GS-R harness for a couple of plugs, especially when you can sell it and get some money.

T bracket needs come from a '99 - '00 Si, you will also need a 2 post driver's side mount from the same.

devney

I could be wrong but I'm almost positive you need a t bracket from a 99-00 SI. As for the harness you can't use the gsr harness, but you can use the harness that you are currently using. You may have to do a little wiring.

edit: 94EG8 beat me to it

hondanerd87

def gotta use the 99-00 si t bracket i jus went through that and the top post mount drivers side for the 99-00 si and def use the ex harness itll save u $

94EG8

This thread is 2 years old.