Loud Noise and Egine Vibrating
#1
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Casa Grande AZ
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Loud Noise and Egine Vibrating
I was driving my del sol and i was runnign pretty hard when all of sudden i heard a really loud whinny nose and then after slowing down the car started vibrating and i would give it some gas then it went away for a second but came right back so i pulled over and looked under the hood and the alternator belt was missing and the crankshaft pulley was loose like wobble loose. I am confused at what cause the problem i had it towed to my house and took off the pulley and the bolt that holds on the pulley was messed up on the threads at the end. I cant put the bolt on back on cause it doesnt go in straight it keeps wanting to go at an angle. I havent tried to start it again
Any advise would help thank you i really dont want to take it in i dont trust people working on my car. The engine is a D16Z6 car is 1993 honda del sol Si, i only have one belt on the pulley cause i dont have A/C or power steering in the car if you need anymore info let me know Thank Again
Any advise would help thank you i really dont want to take it in i dont trust people working on my car. The engine is a D16Z6 car is 1993 honda del sol Si, i only have one belt on the pulley cause i dont have A/C or power steering in the car if you need anymore info let me know Thank Again
#2
Honda-Tech Member
Join Date: Jul 2008
Location: Laurel, DE, US
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
Re: Loud Noise and Egine Vibrating
Was the locking wedge thing on the pulley? if not it could have vibrated/backed out itself loose an went bad from there...
#3
Honda-Tech Member
Join Date: Oct 2005
Location: WI, U.S.
Posts: 746
Likes: 0
Received 0 Likes
on
0 Posts
Re: Loud Noise and Egine Vibrating
sounds to me like u might want to try a new bolt, if it still doesn't go in straight you might as well plan on needing a new crank, and poss. more depending on if anything is messed up internally
#5
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: Casa Grande AZ
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Re: Loud Noise and Egine Vibrating
the locking wedge was not in there it was sitting inside the pulley when i pulled it off and the timming belt wasnt really loose just a little bit loose but not alot
Thanks
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Frost_1097
Honda Civic / Del Sol (1992 - 2000)
4
07-04-2007 06:25 AM
fatalman
All Motor / Naturally Aspirated
4
11-13-2005 06:43 PM