komat

i just did a valve adjustment on my b16
exhaust .007in
intake .006in
but my intake side is still just as loud before i adjusted them
and its only the intake side that is loud!!

what causes it to make the loud ticking sound ???

POE

are they stock cams and valve springs, are u sure u made sure the clearance was tight and snug? U SHOULDNT BE ABLE TO MOVE THE FEELER GAUGE AROUND THAT MUCH. IMO

komat

everything on the motor is stock

all the locknut are torque to 14lb
triple checked each valves with feeler gauge b4 putting the cover back

POE

so u are sure the clearance on the intake valve isnt to much? and is very tight.

komat

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POE &raquo;</TD></TR><TR><TD CLASS="quote">so u are sure the clearance on the intake valve isnt to much? and is very tight.</TD></TR></TABLE>

yep i put my feeler guage on .006in . when it got tight enough to move it out. i would try to use the .007in to see if it would go in

POE

make double sure thats the right size for that motor, and make sure u got the right feeler, i dontknow what else could be the problem...

komat

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by POE &raquo;</TD></TR><TR><TD CLASS="quote">make double sure thats the right size for that motor, and make sure u got the right feeler, i dontknow what else could be the problem...</TD></TR></TABLE>

i did
was looking at the helms b4 i did it and wrote all the info on paper
may take it in somewhere to a pro to let them do it if i cant figue it out

sik96teg

sure its jus not your injectors

Pioneer162

was hoping someone would mention that! yes, fuel injectors tend to tick....what sort of condition are they in?

Kidnkorner

have you considered the lost motion assemblies?