ITR Rear seat question
#1
Junior Member
Thread Starter
Join Date: Jan 2009
Location: Arizona
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
ITR Rear seat question
I have been doing some searching online, and cant quite seem to find the answer I am looking for. I want to put ITR Rear seats in my eg hatchback, but I am reading that the DC2 seats dont quite fit right and the bottom piece is just held down by passengers/seat belt.
But I also read that the DB8 4 Door ITR Rear seats are a direct fit. Any clarification/picture confirmation of the 4 door rear seats in an eg hatch would be great because I think I want to put the itr rear seats in my eg, but want them to function as well. Any help would be great
But I also read that the DB8 4 Door ITR Rear seats are a direct fit. Any clarification/picture confirmation of the 4 door rear seats in an eg hatch would be great because I think I want to put the itr rear seats in my eg, but want them to function as well. Any help would be great
Last edited by SoloCivicSi; 02-28-2010 at 03:14 AM.
#2
Honda-Tech Member
Join Date: Sep 2003
Location: bottom
Posts: 3,907
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR Rear seat question
take the bottom half of the itr 4 door and top half of itr 2dr seats and you will have a direct fit with no gap all around. its a bitch to piece them together like that but its worth the fitment
if you use both from a 2 dr. they will bolt in but you will have like a 3-4 inch gap all around the bottom.
works with all dc seats
if you use both from a 2 dr. they will bolt in but you will have like a 3-4 inch gap all around the bottom.
works with all dc seats
#4
Junior Member
Thread Starter
Join Date: Jan 2009
Location: Arizona
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Re: ITR Rear seat question
I have found 2 sets of 4 door itr seats actually. Will the complete 4 door itr rear interior fit in the eg hatch properly is my question.
#6
Information Leafblower
iTrader: (2)
Re: ITR Rear seat question
Here's an informative one: https://honda-tech.com/forums/honda-acura-28/itr-rear-seats-eg-92-95-hatch-1315439/#post16987898
This is what you want. You want the top sections from a DC2 hatch, and the bottom section from the DB7/DB8 sedan.
The sedan top section will not fit the hatch. It is too wide and tall, and won't mount properly. The hatch bottom section is too small to cover the gap left between the top and bottoms of the seats.
The sedan bottom covers the usual gap that would be left between the hatch tops and bottom cushion. The picture above should show you exactly what I mean.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
joseph weldon
Honda Civic / Del Sol (1992 - 2000)
6
11-08-2011 03:05 PM
99SlammedCivic
For Sale
101
07-03-2007 02:19 PM