itr motor in eg hatch....
#3
Honda-Tech Member
Join Date: Feb 2002
Location: South Bay, CA
Posts: 1,700
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor in eg hatch.... (93hb)
13's easy......with traction low 13's...without...high 13's
If you run a 14 ET with an EG hatch and ITR motor....something is wrong
If you run a 14 ET with an EG hatch and ITR motor....something is wrong
#4
Junior Member
Join Date: Jun 2002
Location: Timmmaaayyyyyy
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor in eg hatch.... (SergEK)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SergEK »</TD></TR><TR><TD CLASS="quote">13's easy......with traction low 13's...without...high 13's
If you run a 14 ET with an EG hatch and ITR motor....something is wrong </TD></TR></TABLE>'
Man, do you even own or ever driven a type r swapped hatch?? I own a Si with a JDM 97 type r swap with 98 JDM spec tranny and I dont believe I would break into the 13's. Granted I have AC and full interior, but I also have mods. My car is quick, but I dont think its 13's material. Get your facts straight before you answer.
If you run a 14 ET with an EG hatch and ITR motor....something is wrong </TD></TR></TABLE>'
Man, do you even own or ever driven a type r swapped hatch?? I own a Si with a JDM 97 type r swap with 98 JDM spec tranny and I dont believe I would break into the 13's. Granted I have AC and full interior, but I also have mods. My car is quick, but I dont think its 13's material. Get your facts straight before you answer.
#6
Honda-Tech Member
Re: itr motor in eg hatch.... (SlowazzGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SlowazzGSR »</TD></TR><TR><TD CLASS="quote">'
Man, do you even own or ever driven a type r swapped hatch?? I own a Si with a JDM 97 type r swap with 98 JDM spec tranny and I dont believe I would break into the 13's. Granted I have AC and full interior, but I also have mods. My car is quick, but I dont think its 13's material. Get your facts straight before you answer.</TD></TR></TABLE>
si's are piggy's
i if you are running a GOOD motor with proper installation and proper stock engine management with decent traction, the B18C5 will give you consistant 13's provided that you are a halfass decent driver
Man, do you even own or ever driven a type r swapped hatch?? I own a Si with a JDM 97 type r swap with 98 JDM spec tranny and I dont believe I would break into the 13's. Granted I have AC and full interior, but I also have mods. My car is quick, but I dont think its 13's material. Get your facts straight before you answer.</TD></TR></TABLE>
si's are piggy's
i if you are running a GOOD motor with proper installation and proper stock engine management with decent traction, the B18C5 will give you consistant 13's provided that you are a halfass decent driver
Trending Topics
#11
Honda-Tech Member
Join Date: Aug 2001
Location: The Emerald City, USA
Posts: 3,025
Received 0 Likes
on
0 Posts
Re: (WiDeBoDyEK)
B18C5-EH2 runs a low 13 in his w/ just bolt-ons. I think his best was a 13.3 before a part broke when racing a EH/H22, which he would have beat!
I think he still has a link in his signature with the whole story.
I think he still has a link in his signature with the whole story.
#13
HELLO,GOOD MORNIN'
Join Date: Sep 2002
Location: Savin lives
Posts: 8,909
Likes: 0
Received 0 Likes
on
0 Posts
Re: (soslodelsol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by soslodelsol »</TD></TR><TR><TD CLASS="quote">should be doing low 13's high 12's granted that everything is running right...no check engine light, etc.
of course that's with slicks tho'...ha</TD></TR></TABLE>
Not even with slicks maybe mid 13's..........maybe.
of course that's with slicks tho'...ha</TD></TR></TABLE>
Not even with slicks maybe mid 13's..........maybe.
#15
Re: (D16Z6racing)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by D16Z6racing »</TD></TR><TR><TD CLASS="quote">B18C5-EH2 runs a low 13 in his w/ just bolt-ons. I think his best was a 13.3 before a part broke when racing a EH/H22, which he would have beat!
I think he still has a link in his signature with the whole story.</TD></TR></TABLE>
That run was on slicks.
I think he still has a link in his signature with the whole story.</TD></TR></TABLE>
That run was on slicks.
#16
Re: (Jawad)
i say if ur a bad driver 14's, but shyt if ur car is gutted i dont see a reason y u wont hit mid to low 13's. I mean the itr guys said they where running 13's with ther stock ones so i say 13's all day
#17
Honda-Tech Member
Join Date: Feb 2000
Location: Toronto, Canada currently residing in ATL, GA, USA
Posts: 4,675
Likes: 0
Received 0 Likes
on
0 Posts
Re: (gezer)
Its possible to get high 13's out of a full interior SI hatch w/an ITR motor and street tires (Stock motor with nothing more then bolt-ons that is).
#18
the jackass who actually said 12's needs to stop watching movies and dreaming of being Paul Walker. That is WAY far fetched. We are talking high 13's on a stock motor. good tires and nice suspension, possible mid 13's, but that is going to have to be a hell-of-a 60'.
#20
Honda-Tech Member
Re: (Damon)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Damon »</TD></TR><TR><TD CLASS="quote">the jackass who actually said 12's needs to stop watching movies and dreaming of being Paul Walker. That is WAY far fetched. We are talking high 13's on a stock motor. good tires and nice suspension, possible mid 13's, but that is going to have to be a hell-of-a 60'.</TD></TR></TABLE>
i dunno, although it's not very probable, it is possible....there was a persone on HT before than ran a 12.8 in a gutted hatch with a B18c1 motor, IHE, on slicks
it would be possible to hit the 12 second realm with a gutted hatch, bolt ons, a badass driver, sea level elevation (like houston), and some badass tuning via aftermarket engine management with sticky slicks....once again, engine condition comes into play.....do you have a dud, a norm, or a freak engine
BTW, i cant wait to see 2fast2furious....it's gonna be OfF ThE HoOk y0! they upped the amp with a former blackhawk skyline gone ApC and altezzas galore, really high budget film
(in case you are close minded, i was being sarastic)
i dunno, although it's not very probable, it is possible....there was a persone on HT before than ran a 12.8 in a gutted hatch with a B18c1 motor, IHE, on slicks
it would be possible to hit the 12 second realm with a gutted hatch, bolt ons, a badass driver, sea level elevation (like houston), and some badass tuning via aftermarket engine management with sticky slicks....once again, engine condition comes into play.....do you have a dud, a norm, or a freak engine
BTW, i cant wait to see 2fast2furious....it's gonna be OfF ThE HoOk y0! they upped the amp with a former blackhawk skyline gone ApC and altezzas galore, really high budget film
(in case you are close minded, i was being sarastic)
#21
Honda-Tech Member
Join Date: Jan 2002
Location: Sierra Vista AZ
Posts: 2,356
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor in eg hatch.... (SlowazzGSR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SlowazzGSR »</TD></TR><TR><TD CLASS="quote">'
Man, do you even own or ever driven a type r swapped hatch?? I own a Si with a JDM 97 type r swap with 98 JDM spec tranny and I dont believe I would break into the 13's. Granted I have AC and full interior, but I also have mods. My car is quick, but I dont think its 13's material. Get your facts straight before you answer.</TD></TR></TABLE>
lol
14.1 with 2.4 60'ers 1/8 @ 80 mph
nothing was TERRIBLY wrong, just not good launches
itr in eg....well an si high 13's if you know how to drive it. i should be pulling 13.9 or better once i figure it all out
on the other hand.....a mod here had 13.3 on drag radials in his cx with intake header and exhaust with a chipped ecu
essentially the STRIPPED 2000 lb cx could of hit 12.9 according to his educated guesswork
Man, do you even own or ever driven a type r swapped hatch?? I own a Si with a JDM 97 type r swap with 98 JDM spec tranny and I dont believe I would break into the 13's. Granted I have AC and full interior, but I also have mods. My car is quick, but I dont think its 13's material. Get your facts straight before you answer.</TD></TR></TABLE>
lol
14.1 with 2.4 60'ers 1/8 @ 80 mph
nothing was TERRIBLY wrong, just not good launches
itr in eg....well an si high 13's if you know how to drive it. i should be pulling 13.9 or better once i figure it all out
on the other hand.....a mod here had 13.3 on drag radials in his cx with intake header and exhaust with a chipped ecu
essentially the STRIPPED 2000 lb cx could of hit 12.9 according to his educated guesswork
#22
Junior Member
Join Date: Jun 2002
Location: Timmmaaayyyyyy
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor in eg hatch.... (SpoonFedHatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SpoonFedHatch »</TD></TR><TR><TD CLASS="quote">
si's are piggy's
i if you are running a GOOD motor with proper installation and proper stock engine management with decent traction, the B18C5 will give you consistant 13's provided that you are a halfass decent driver </TD></TR></TABLE>
When i said SI, I mean a 93 SI. It has full interior, with spare, tools, and AC. All beit has a carbon fiber hood but that doesnt help much. Im running Spoon header, Spoon exhaust, AEM CAI, Spoon flywheel, and exedy clutch and I still dont believe its in the 13's. Rubber is Dunlop SP 9000, but even with nice rubber still not good enough to go 13's. This is all speculation though, because I have never driven at the track with it. I can tell u it whoops Mustang GT's and is prolly just about as fast as the new Camaros with LS1's.
si's are piggy's
i if you are running a GOOD motor with proper installation and proper stock engine management with decent traction, the B18C5 will give you consistant 13's provided that you are a halfass decent driver </TD></TR></TABLE>
When i said SI, I mean a 93 SI. It has full interior, with spare, tools, and AC. All beit has a carbon fiber hood but that doesnt help much. Im running Spoon header, Spoon exhaust, AEM CAI, Spoon flywheel, and exedy clutch and I still dont believe its in the 13's. Rubber is Dunlop SP 9000, but even with nice rubber still not good enough to go 13's. This is all speculation though, because I have never driven at the track with it. I can tell u it whoops Mustang GT's and is prolly just about as fast as the new Camaros with LS1's.
#23
Honda-Tech Member
iTrader: (5)
Join Date: May 2002
Location: formally peagreenhatch
Posts: 3,708
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor in eg hatch.... (Unsung EM1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Unsung EM1 »</TD></TR><TR><TD CLASS="quote">High 13's all day long with a strong motor in a cx or like chassis. Rubbers are the key.</TD></TR></TABLE>
ahh yes, rubber is the key~
ahh yes, rubber is the key~
#24
Re: itr motor in eg hatch.... (93hb)
I ran a 14.01 with a ~150whp GSR swap in a 92 Si on street tires.
15-25 more whp from an ITR swap will easily get you into mid 13s.
Learn to drive.
Some of ya'll need to quit bench racing.
If you have no idea about what you're talking about, don't post up a damn thing.
15-25 more whp from an ITR swap will easily get you into mid 13s.
Learn to drive.
Some of ya'll need to quit bench racing.
If you have no idea about what you're talking about, don't post up a damn thing.
#25
Thread Starter
Join Date: May 2002
Location: texas
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
Re: itr motor in eg hatch.... (SkyeC)
well, i got a dx eg hatch and i'm thinking of either a itr swap or a ctr swap to go in there as soon as i sell my ls swap thats in there now.