Identifying my engine
06-20-2012, 12:43 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2012
Location: South Platte
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Identifying my engine
So about 6 years ago my boss/mentor had his mechanic swap out my stock D15b8 engine in my 92 CX hatch. Now that was way before I got into upgrading the car. No that I am interested in building the car, what I have found out is in it is:
Stamped "D15B" JDM non-Vtec block
Stamped D16a6 pm3-1 head
D15B 16 valve - valve cover
D15b8 P20/A000 tranny
D16z6 intake manifold
D16z6 fuel rail/injectors
P06 ECU
What does this all mean? Did it get built for economy? Is it some mini-me swap? Any help will help me understand what I have! Thanks
Stamped "D15B" JDM non-Vtec block
Stamped D16a6 pm3-1 head
D15B 16 valve - valve cover
D15b8 P20/A000 tranny
D16z6 intake manifold
D16z6 fuel rail/injectors
P06 ECU
What does this all mean? Did it get built for economy? Is it some mini-me swap? Any help will help me understand what I have! Thanks
Last edited by Yo Pintura Trenes; 06-20-2012 at 01:02 PM.
06-20-2012, 01:05 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2012
Location: South Platte
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Re: Identifying my engine
Thanks for the info. So I'm assuming he swapped the engine with the JDM and then put a 90 Si head on it as in it the JDMs was bad and kept the original tranny?
Thread
Thread Starter
Forum
Replies
Last Post