I need a Pic of the O-ring on the distributor.
#1
Thread Starter
Join Date: Apr 2005
Location: Tillamook, OR, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
I need a Pic of the O-ring on the distributor.
As the title says. I need to see how the O-ring fits on the shaft. I picture of it on would be appreciated. Thanks.
NO DIAGRAMS PLEASE. Actual Picture.
NO DIAGRAMS PLEASE. Actual Picture.
#2
Junior Member
Join Date: Jun 2005
Location: Des Moines, Iowa
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need a Pic of the O-ring on the distributor. (aoe_virus)
does this help.... https://honda-tech.com/zerothread?id=1065831
#5
Thread Starter
Join Date: Apr 2005
Location: Tillamook, OR, USA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Re: I need a Pic of the O-ring on the distributor. (Echo7847)
To explain further why I request where it went is because I had to get a non honda o-ring from car-quest. Out of the two I bought one was bigger than the other yet were supposed to be the same size. When I looked at the Distributor shaft I didn't realize that where the o-ring went was a o-ring.
It was worn down flat so I thought it was metal, and didn't bother poking it too see if it was rubber . In the end I got it on with the smaller of the two and it fit like a glove. For future reference the size of the O-ring i used was 1in x 1/8 in. Hopefully this will fix my 1qt per 3000mi problem.
Thanks again for you help guys.
It was worn down flat so I thought it was metal, and didn't bother poking it too see if it was rubber . In the end I got it on with the smaller of the two and it fit like a glove. For future reference the size of the O-ring i used was 1in x 1/8 in. Hopefully this will fix my 1qt per 3000mi problem.
Thanks again for you help guys.
Thread
Thread Starter
Forum
Replies
Last Post
Vtec_India
Honda Civic / Del Sol (1992 - 2000)
8
02-15-2016 10:15 PM
mellowman164
Honda Accord (1990 - 2002)
5
01-12-2014 10:59 PM