em1slim

i have a 99 civic em1 i just put some lowering springs and everytime i turn the corner or do u turns it will make like a noice with the tires with the fenders and my friend said that i roll up the fenders but he does not know how. anybody help thanx

T3KNiQe

You just "bend" them from what I kno. IDK I took mine out, though I dont recommend you do that...

variable

iTrader: (1)

1-Jack up the front of the car, remove front wheels
2-Remove the fender liners if you havnt already done so.
3-Gut a baseball bat or a hammer with a decent sized handle
4-Stick the bat or hammer handle along the inside of the fender (where the wheels would be rubbing) and apply preesure and move along the inside lip of the fender-the objective here is to bend or roll the edge of the fender up and in so it no longer rubs against your tire

sde780

http://www.google.com/search?hl=en&q...earch&aq=f&oq=

there's many many videos and FAQ's

CRX T-Si

Are you sure your not just hitting the inner fender/splash guards??

slimjimming6688

make sure u use a heat gun or else youll chip your paint

slimjimming6688

iv seen people use propain on paint but i think thats kind of risky

eskerley

jack the car up. stick something with a large enough diameter between the wheel and fender, hold object at and angle and slowly lower the car and roll the object between the fender and wheel.
I used a baseball bat and the handle to my jack it worked pretty good.

Sean @ ESG

iTrader: (1)

I'd take it somewhere to have them rolled if I were you.

THEJDMWAY

BINGO~

slimjimming6688

be sure to heat up the area being roled or your paint will chip

em1slim

thanx for the help

em1slim

i am going to try that bat and heatgun fursure and its the fender it hits

tkda

hey before you do all that make sure its not just loose lug nuts.

KillBot

Werd...or borrow a fender roller. A shop should charge less than $100 for this. I had all four rolled for $40 with perfect results and no paint issues.

93egboosted

yea def get a fender roller or borrow one is your best bet

em1slim

fersure ill go to a shop see if could borrow one and i checked its no loose lug nuts but thanx man

blueg6

x2

knightsef-eg

this thread is over played now...

http://www.youtube.com/watch?v=eWMKM6wcvEo there is your answer its japanese but just watch its a DIY

EK420EG69

wow ..didnt know that, what does the heat do........?

john666

since your fairly close go to
DRIFTSPEED
11082 Winners Cir., #B
Los Alamitos CA 90720
Tel 562-342-9000

they use this tool

http://www.tirerack.com/images/acces.../fenderlip.jpg