soslow93

im researching,doing a sohc build.every thing ive read says use the zc pistons and rings in the d15b7 block. ive got the z6 head ecu dist, and all of that out of my del sol. using the y8 head gasket and basic bolt on's this should be good no?
thought was why use the zc pistons and rods in my block why not just use zc bottom end???????? i believe every thing should bolt on correctly not sure though?pls help

976

Everything but the header should bolt up, but not too sure. I would recommend the hybrid fourm.

conesmasher

you should bolt on the itr head onto your d-series block. But be careful you may crack your intake manifold welds. I have seen this done like 40whp. The bolts dont line up so it is custom job, and you may fry the rings if you use more than one bottle of NOS!!

deftones0817

dude wtf are you talking about...its not funny he is asking a question. Dude try the hybrid forum like the guy said above.

DEF

function83

you should be fine, i was goin to that too but in a 1.5 block.
zc pistons, y8 headgasket and a z6 head. if you have anymore
questions pm spade, he knows alot.


[Modified by djhatch, 6:47 AM 1/27/2003]

conesmasher

Dude you guys sometimes get to serious on here. Learn when to have a little bit of a sense of humor. That is my boy and I was just posting that to have a little of fun, so please calm down. I hope that you guys could get some more info to my boy though, I need him to start stomping my GS-R in more than just autox, I want to see him beat me in a straight line so I can go have him race on a 2g buy in. LOL

pennies_hatchie

iTrader: (1)

noobies will never learn...
dont answer if you're incompetent