FlatFX

Hi !

Due to some people have a genuine mugen wing in this forum I wanted to ask if you can give me a brief installation guide how to install it on my Del Sol.
Or are there also installations manuels from Mugen somwhere to find?

Bought one some weeks ago and I want to put it on my car next week.

mrharmonic

bump

NOFX

Brackets hold the wing to the trunk edges. It's basically clamped on from what I understand.

FlatFX

do i have to drill new holes into the trunk "roof" ?

the mugen wing has its screws on the left and right corner the oem wing has it in the middle.

what do I do with the old holes ?

this it how the mount looks like

http://www.abload.de/image.php?img=sdc111423554.jpg

Fake

iTrader: (1)

by the looks of that picture
that wing does not have the screws to that bracket
hard to tell if it has a bracket or not

there is NO drilling needed when u install a mugen wing

the brackets fit b/t the trunk lid and the trunk (onced shut)

NOFX

Yeah, looks like it's missing the bracket on that one.

FlatFX

what kind of brackets ?

I do have these here too



on the sol picture thread Mugen-K
also postet some pics. Is that all I need for installing?

https://honda-tech.com/forums/showth...g#post37327758

Fake

iTrader: (1)

ok yeah those are the brackets
last time i checked those bracket sit in side that space (first pic u posted)
its held inside there by sticky double side tape
and once there on there u just open ur trunk place the wing on top
and simply place the brackets in the groove of the trunk and
tighthen the allen wrenched bolts tight so the wing wont fly off

FlatFX

puhh lucky I thought there would be missing something.

Fake

iTrader: (1)

if u cant figure it out ill buy it

Hater

You're stuck filling the old holes or getting a trunk without holes. The Mugen trunk spoiler doesn't cover them at all.

Drilling holes for the pedestals is optional. The original Mugen spoiler came with a paper guide to drill holes on the sides of the emblems for self tapping screws, but you would need to go up through the USDM license plate lights with an elbowed rachet to reach them properly.

Below I've included a really bad line drawing of how the clips fit.
.____
| ____
|____ '|
...____|

The top "C" represents the USDM passenger side, opening out. The top of the bottom backwards "C" goes inside the top "C", and the bottom of the bottom "C" goes under the lip of the trunk lid. You tighten the little allen bolts and the two "C"s will clamp into each other, securing the Mugen spoiler in place.