How install Energy Suspension tie rod dust boot on 92-95 civic?
09-30-2010, 09:35 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
How install Energy Suspension tie rod dust boot on 92-95 civic?
Does any one know how to install The energy suspension tie rod dust boot on a 92-95 civic. or should i just get the tie rod new
09-30-2010, 09:54 AM
#2
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Re: How install Energy Suspension tie rod dust boot on 92-95 civic?
It shouldnt be any different than stock I would think? did you already remove the old boot and spring? put the energy boot on and use the factory spring.
09-30-2010, 01:14 PM
#3
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: How install Energy Suspension tie rod dust boot on 92-95 civic?
Yo what about front shock mount bushings do you know where i can get a diy. or could tell me where they go
09-30-2010, 03:08 PM
#4
Honda-Tech Member
Join Date: Aug 2010
Location: Olympia,Wa
Posts: 4,592
Likes: 0
Received 0 Likes
on
0 Posts
Re: How install Energy Suspension tie rod dust boot on 92-95 civic?
are you talking about the torque mounts on the front or the the bushing for the strut hat?
09-30-2010, 04:23 PM
#5
Honda-Tech Member
Thread Starter
Join Date: Mar 2009
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Re: How install Energy Suspension tie rod dust boot on 92-95 civic?
im not sure thats why i was asking but its this one http://www.energysuspensionparts.com...prod=16%2E8102
10-01-2010, 06:25 PM
#7
Honda-Tech Member
Join Date: Oct 2005
Location: NY, NY
Posts: 566
Likes: 0
Received 0 Likes
on
0 Posts
Re: How install Energy Suspension tie rod dust boot on 92-95 civic?
Does this help for the shock mount bushings?
http://www.energysuspensionparts.com...sion/17162.pdf
When I did my tie rod boots, I took the tie rod ball joint out of the knuckle, removed the OE rubber boot, packed the ES poly boot with high temp grease, reinstalled the boot, and reinstalled the tie rod.
http://www.energysuspensionparts.com...sion/17162.pdf
When I did my tie rod boots, I took the tie rod ball joint out of the knuckle, removed the OE rubber boot, packed the ES poly boot with high temp grease, reinstalled the boot, and reinstalled the tie rod.
Thread
Thread Starter
Forum
Replies
Last Post
HatchBox
Honda CRX / EF Civic (1988 - 1991)
13
10-24-2004 06:00 AM
