ok i already know everyone is going to tell me to just go to the muffler shop, but i find that it's pointless and a waste of money since i'm going to be swapping exhausts in about 2 weeks anyways.
well basically my exhaust has been bottoming out everytime i hit a few bumps on the road and it eventually ate a hole through the piping. i went to take emissions today and the sniffer didn't detect enough exhaust gasses due to the leak. they told me they can't pass me if their isn't enough exhaust gasses coming out of the muffer tip. what is something i can use to seal up the hole good enough just so i can go take emissions without it leaking?
there is one type where you wrap your exhaust piping and then when u drive it... the heat of the exhuast gases cure the tape on...
yeah, thats the kind i used. You have to take some tin like from a soda can and put in on the hole in the piping first then wrap it. It worked for a week or so i think. I guess u could do both. Like jb weld the hole then wrap it up with that other stuff..
97 audi a4
06 lotus elise
95 del sol
if your swappng exhausts in 2 weeks anyways why dont you just drive the car for 2 weeks and then swap the exhaust? i mean your going to spend $ and time on your old exhaust and its going to be out anyways, its a better idea to leave it alone. unless your tabs are expired and you need to pass emissions.. maybe drive another car that you have or have a friend drive u around..
Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way.
Copyright/trademark/sales mark infringements are not intended or implied.