metalslug

The fitting on the intake manifold is broken, how do i exactly fix his? Any ideas and suggestions would greatly be appreciated. Thanks.

jbpnoman

Do you want to properly fix it, or ghetto rig it?

If you want to properly fix it, you have two options. Option A, replace the intake manifold. Option B, find a way to remove the part of the fitting that is stuck in the IM, and find a replacement. Good luck on that - They aren't sold on their own.

If you want to ghetto rig it, find a way to fully remove the part of the fitting stuck in the IM, and then find some pipe fitting to screw in there.

metalslug

thanks, ill see which is the easiest route to take from those you listed....

Texas4door

Could the OP weld/braze it back together?

strategy400

Epoxy if you really want to slum it.

sleepyaccord96

when i got my h22a swaps from hmotors ( i bought 2 jdm h22a swaps one was lsd and one was not) anyways, both had those fitting broken off/cracked. i simply CAREFULLY removed them and pushed new ones in that were free courtesy of steve at hmo.

strategy400

The key here is not to do anything that could result in foreign debris being sucked into the engine.

Thank you, thank you (graciously accepts Capt. Obvious award and sets it on the mantle with the rest).

metalslug

I have other manifolds, i will try and remove, any idea on how?