The DX Rex

basically went by the local junkyard today and they had a 90-93 integra with rear disk so im going back tommorrow to pull it off since it only costs $60 bucks for the rear disk conversion and was wondering how to take of the e brake cables since i will need them to swap the rear disk on my 93 VX hatch.

i think the prop. valve is gone but on that one DA but there is another DA there(rear disk is already gone off the 2nd one) and i didnt check that so i should be able to get the prop valve and maybe even upgrade to the BB and MS of the DA.

tried searching too.... thanks

getnasty

remove the console. under the e brake there is two cables un hook those. there should be 2 10mm bolts. take those off. go under the car and the e brake cables should be run under the heat sheilds. take the heat sheilds off and unbolt the bolts that hold the cables to the body. then you are done

The DX Rex

sounds good to me, thanks, just needed an idea of how difficult it was.