How do I take the stock shift knob off (00 Si)
10-17-2005, 08:35 PM
#1
Junior Member
Thread Starter
Join Date: Sep 2003
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
PLEASE HELP:::How do I take the stock shift **** off? (00 Si)
Everytime I seem to turn it, the shift boot turns with it. I know there's a pin in there that is holding the shift boot to the ****, but how do I go about releasing it so I can take the shift **** off?
10-17-2005, 08:51 PM
#2
Honda-Tech Member
Join Date: Jan 2002
Location: Los Angeles, CA, USA
Posts: 26,519
Likes: 0
Received 2 Likes
on
2 Posts
Re: PLEASE HELP:::How do I take the stock shift **** off? (Bagarbilla)
Hmmmm, unless it was ghetto-rigged, I always just turn the shift ****. Have you tried holding the top of the boot in place while you turn the shift ****?
10-17-2005, 08:54 PM
#3
Join Date: May 2005
Location: iNCOMPLETE, Cali
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Re: PLEASE HELP:::How do I take the stock shift **** off? (Bagarbilla)
shouldnt be held together... just keep turnin it while holdin on the top of the boot.... tru sticking a flat head inbetween the top ring of the boot and bottom of the shiftknob and pry it a little... might be stuck from who know what.
10-18-2005, 12:12 AM
#7
Junior Member
Thread Starter
Join Date: Sep 2003
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: (hushypushy)
The problem Im having now is getting the numbers to line up straight since they're sitting kind of off to the side.
The skunk2 shift **** I ordered didn't come with the small 'nut' that goes under it.
Any ideas on how to tackle this problem?
The skunk2 shift **** I ordered didn't come with the small 'nut' that goes under it.
Any ideas on how to tackle this problem?
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
