help with removal of door handles
08-09-2004, 11:27 PM
#3
B*a*n*n*e*d
Join Date: Apr 2004
Location: Malt in yor moulth, boston
Posts: 3,904
Likes: 0
Received 1 Like
on
1 Post
Re: help with removal of door handles (Revolver)
none of thoose question matter, goto autozone and get a door handle remover tool, it's a thin metal tool with a u cutout in the middle. put it at the very base of the handle and door panel and turn, done. then the door panels pop off, you might have 1 or 2 screws in the panel btw the controls. any problems msg me
08-10-2004, 07:03 PM
#5
Join Date: Aug 2004
Location: Lawrenceburg, TN, USA
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Re: help with removal of door handles (raybord)
It would be a good idea to take the panels off. There are a few rods that atach to them that you have to take off probally more stuff to. Why are you taking them off
08-11-2004, 04:12 PM
#7
Member
Join Date: Feb 2003
Location: Dutchess County, NY, USA
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
Re: help with removal of door handles (raybord)
remove 2 screws.. one in oval handle piece, one behind inner door handle, pop the clip off between the panel and the window crank, then the crank pops off, one plastic screw up near mirror then the panel pops off.... u might have to cut the plastic lining inside the door and theres 2- 10mm bolts holding the handle on... after that u need to pop the plastic rivet out that h0lds the handle to the metal rod.and theres also something goin to the door lock u need to disconnect as well.
Trending Topics
08-11-2004, 04:59 PM
#8
Honda-Tech Member
Join Date: Feb 2003
Location: Riverside, CA, USA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Re: help with removal of door handles (DewMota)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DewMota »</TD></TR><TR><TD CLASS="quote">none of thoose question matter, goto autozone and get a door handle remover tool, it's a thin metal tool with a u cutout in the middle. put it at the very base of the handle and door panel and turn, done. then the door panels pop off, you might have 1 or 2 screws in the panel btw the controls. any problems msg me</TD></TR></TABLE>
You must be talking about a tool to pop off the clip on the window crank. You really don't need a special tool for that.
You must be talking about a tool to pop off the clip on the window crank. You really don't need a special tool for that.
Thread
Thread Starter
Forum
Replies
Last Post
XViEtBoiX
Honda Civic (2001 - 2005)
2
12-16-2006 10:38 AM