HELP : CKF p1337 bypass obd2a
03-30-2013, 06:43 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: El paso
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
HELP : CKF p1337 bypass obd2a
i have redone this twice now to make sure i am not f**king something up and still getting the code ?!?!?! when it says "depin or cut wires few inches away is the wire cutting like this for wires c1 and c11
CUT ==[ 8]====ECU here
or
==[ 8]==CUT== ECU here
1997 ex wiring harness on a b16a3
EDIT: Following http://www.ff-squad.com/technet/ckftrick.htm
CUT ==[ 8]====ECU here
or
==[ 8]==CUT== ECU here
1997 ex wiring harness on a b16a3
EDIT: Following http://www.ff-squad.com/technet/ckftrick.htm
Last edited by buster97; 03-30-2013 at 07:02 PM.
03-30-2013, 07:01 PM
#2
Honda-Tech Member
Thread Starter
Join Date: May 2009
Location: El paso
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Re: HELP : CKF p1337 bypass obd2a
reread it
the reason behind cutting C1 and C11 AFTER the quick-splice, is to prevent conflicts with the ECU that may arise such as CEL code 9 (CYP) and P-code 1337 (CSF sensor no signal).
the reason behind cutting C1 and C11 AFTER the quick-splice, is to prevent conflicts with the ECU that may arise such as CEL code 9 (CYP) and P-code 1337 (CSF sensor no signal).
Thread
Thread Starter
Forum
Replies
Last Post
max240
Honda Accord (1990 - 2002)
7
02-24-2004 04:39 PM