Honda3133

I have a 1997 civic cx hatch and im tring to put the transmission housing back on but theres like an inch left that i can't push in? any idea?

92lxsleeper

try turning the gears to line up the splines i think

Honda3133

what are the splines? sorrynoob

TOP91

http://en.wikipedia.org/wiki/Spline_(mechanical)

I had this problem too.

Former User

The snap ring is probably not seated properly.

92lxsleeper

Ron wouldn't you have to wait until the case is on completly before installing the snap ring?

tlarimer

iTrader: (3)

Or the clutch disc isn't aligned right and the main shaft isn't going into the pilot bushing, happened to me a dozen times. Make sure the clutch disc is aligned properly, it takes some wiggling sometimes to get the trans seated against the block.

Honda3133

I got it on! it was the bolts with the springs on them that were blocking so i took out those 3 bolts and just reinstalled them once the housing was on

TOP91

I don't understand?