dth0ng69

Alright so I had my HID's for about 2 weeks now, and ever since a few days ago my left light starts flickering when I first turn them on at night or something, but it ususally went away like 10 minutes later.

Then Last night When I turned on my headlights the left light started flickering, but in a way where it turns on and off, it did this for 20 seconds and just stayed off. I thought my bulb burnt out, but when I turn my lights off and turn them on again the light immediatly comes back on, sometimes it starts flickering again after 30 seconds and turns off, sometimes it just stays on for the rest of the ride.

at first I thought it was my bulb that burnt out, Now I'm pretty stuck?? I mean everytime it flickers and turns off, It will turn back on after I turn my lights off and turn them back on.

anyone have any slight clue? is my ballast defective? or??
any help, tips, suggestions, feedback would be great. thanks for reading.

patrickstar

its a bad connection. i have this. LOL. just gotta find ur bad connection. it's probably loose.

what's weird for me is i just positioned my ballast in different locations until my light would stay on. only cus the connections would be in a better position.

dth0ng69

hey thnx patrickstar, for the feedback.
where was your bad connection at?
I think the only possible bad connection on my kit is from the power harness from the car to the HID ballast, because that is the only connection that I did ( the other ones were made to pluged to each other)

Jimster480

It sounds like you have a loose ground wire. I had this problem and that was the problem.

Zector

you might also want to , just to avoid lots of troubleshooting, test your kit in a different car to make sure the hid kit works...same thing happened to me with a flickering light and it was just a bad ballast.......you could also try switching the ballasts and seeing if the other light works with the bad side's ballast.....if any of that made sense to you i hope it helps haha

S2Integra

I would also say a bad connection but I experienced recently a bad connection causes a massive arc and the contact melted and the bulb never even came on. With that said it seems that the ballasts could be the culpret. Although it is hard for me to belive that after 2 weeks both ballast would fail. So Im back with every one else, bad ground most likley, maybe bad power connection.

dth0ng69

the weird thing is that side that never failed or never flickers, makes the constant power sound that HID make, while the other one makes the same sound but has intervals of pausing, like it was flickering even when it wasn't..

some random information- The side that flickers always flickers when I first turn on the light while the other one doesn't. which makes me think its the ballast.
As far as I remember 2 weeks ago installing it, the side that flickers has been flickering since the "burn in" process. then was doing good for a few days until it started turning off.

Information that goes against it - Sometimes when I break hard It starts to flicker, (could be a coincidence?)

Jimster480

It could be a ground related issue. What brand of HID's do you have?

rev-teks ek

hey there sometimes it could be a bad balast

rev-teks ek

Do you have warranty on your ballast? Is so u should just go and change for a new one.

dth0ng69

Yeah I have a warranty for the ballast. I bought it from ebay, Im going to attempt to talk to the seller about this.

dth0ng69

Whats weird is that even though the left light always flicker when I turn on the lights the first time of the day. But after they been on for a while or been warmed up it doesnt flicker upon startup..

acake em1

ballast or connection

Jimster480

what ebay HID did you buy? alot of the ones sold there are garbage.

ImportHatch

My HID kit did that when I first put it in. Take the OEM headlight connection and pull the tongs apart a bit and reinsert. Mine was not making a solid connect and could cause it to flicker.

dth0ng69

Hey Importhatch, I was wondering what do you mean by pull the tongs apart a bit??
what part is the tongs?

dth0ng69

oh yeah btw.. forgot to mention, I was making this whole thread about how my left hid was flickering and turning off, and how perfect my right Hid was performing.

well I jinxed my self, Today My I turned on my HID, My RIGHT Hid did not turn on, even when I restarted it, and everything it wouldn't turn on, I tried putting the OEM bulb back into the right side and it works, so I know there power going into the plugs, and I tried putting hid bulbs from the right side to the left side and it works so the bulbs arent defective.
Im guessing its the ballast? but its so weird and random how random parts of my hid kit is breaking.

XenonDepot

I would suggest swapping components left to right to try and isolate the problem.

Are you using a relay harness or are you powering the ballast directly from the OEM wiring?

Steve

dth0ng69

Yeah I'm going to try that right now, but I am powering the ballast directly from oem wiring.

XenonDepot

in that case it just sounds like you're using some very power hungry ballasts.

See if the problem follows the ballast to the other side.

Steve

Jimster480

what brand is your HID kit?

dth0ng69

Hey steve your post interest me.. this seems like a possibility, they sent me a new ballast, Im going to see if it works. I mean they were working fine for about 2 weeks before the one that went out to go out..

but you seem like you are a HID guru.. so your post intrigues me.. what makes you think my ballast is power hungry?

XenonDepot

The symptoms you are describing sound like the same ones we experienced when sampling different products and testing them. Have you had a chance to swap the ballasts left to right?

Steve