Good How-To for installing a Strut bar?
#2
memoryFAB.com representative
Join Date: Jul 2002
Location: MEMORYFAB.COM
Posts: 7,811
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good How-To for installing a Strut bar? (Sethypoo)
unbolt the nuts from the struts and install... reverse the process.. should take about 5 minutes. unless you strip the nuts like i did.
#3
Honda-Tech Member
Join Date: Jan 2002
Location: Raleigh, NC
Posts: 15,334
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good How-To for installing a Strut bar? (Sethypoo)
Are you talking about a strut tower bar for the front? It should be 2 bolts. Pretty self explanitory IMHO.
#4
Honda-Tech Member
Front or rear? Either way, just unscrew the two bolts holding the shock on from inside the engine bay (or trunk), and put it on, and tighten the bolts back.
#6
Electrician
Join Date: May 2004
Location: Astoria, Queens,, Zoo York City, U.S.A.
Posts: 4,709
Likes: 0
Received 0 Likes
on
0 Posts
Unbolt.
Install.
Bolt.
If you can't do it or if you have problems like that other d00d installing a tach, sell your car and take public transportation.
Install.
Bolt.
If you can't do it or if you have problems like that other d00d installing a tach, sell your car and take public transportation.
Trending Topics
#8
Guest
Posts: n/a
Re: (Dimi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dimi »</TD></TR><TR><TD CLASS="quote">
If you can't do it or if you have problems like that other d00d installing a tach, sell your car and take public transportation. </TD></TR></TABLE>
Omg, just shut the **** up. People like you are demeaning to the highest caliber.
If you can't do it or if you have problems like that other d00d installing a tach, sell your car and take public transportation. </TD></TR></TABLE>
Omg, just shut the **** up. People like you are demeaning to the highest caliber.
#9
Honda-Tech Member
Join Date: Feb 2004
Location: Kansas City
Posts: 302
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good How-To for installing a Strut bar.
http://www.geocities.com/Motor....html
geocities.com/MotorCity/Flats/3877/Rear_Strut_Bar.html
http://hazone.com/hstrutbar.htm Front bar
------------------
Modified by Honda.F1 at 4:40 AM 6/28/2004
geocities.com/MotorCity/Flats/3877/Rear_Strut_Bar.html
http://hazone.com/hstrutbar.htm Front bar
------------------
Modified by Honda.F1 at 4:40 AM 6/28/2004
#10
Re: (Louie_EM1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Louie_EM1 »</TD></TR><TR><TD CLASS="quote">
Omg, just shut the **** up. People like you are demeaning to the highest caliber.</TD></TR></TABLE>
Tell me about it...
Just answer the question, for God's sake.
I bet he almost felt obligated to make a smart *** remark.
He even 'explained' in his sig he accutally isn't a trial member, and how many posts he had before; like people give a ****.
Pathetic...
Omg, just shut the **** up. People like you are demeaning to the highest caliber.</TD></TR></TABLE>
Tell me about it...
Just answer the question, for God's sake.
I bet he almost felt obligated to make a smart *** remark.
He even 'explained' in his sig he accutally isn't a trial member, and how many posts he had before; like people give a ****.
Pathetic...
#11
Join Date: Apr 2004
Location: Bay Area, Ca, United States
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good How-To for installing a Strut bar? (Sethypoo)
darn TAXANs yeeeHAAAAAAAA. jk, but dont be a smart ***, there are always newbies who need help, and this is what we are here for.
#12
Electrician
Join Date: May 2004
Location: Astoria, Queens,, Zoo York City, U.S.A.
Posts: 4,709
Likes: 0
Received 0 Likes
on
0 Posts
God damn, it's called sarcasm. Everyone get the banana out of your *** and RELAX! It's a damn joke.
To the original poster, it isn't hard at all. There is no need for fabrication (unless you need to drill, if you need to...mark your holes and drill), there is no tech involved really. Remove the strut tower bolts, adjust the strut bar (if applicable) and bolt down.
Best way to do it, jack the entire front end up, THEN install it and make sure it's tight, then drop down so all the flex will be less.
Happy?
To the original poster, it isn't hard at all. There is no need for fabrication (unless you need to drill, if you need to...mark your holes and drill), there is no tech involved really. Remove the strut tower bolts, adjust the strut bar (if applicable) and bolt down.
Best way to do it, jack the entire front end up, THEN install it and make sure it's tight, then drop down so all the flex will be less.
Happy?
#13
Electrician
Join Date: May 2004
Location: Astoria, Queens,, Zoo York City, U.S.A.
Posts: 4,709
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good How-To for installing a Strut bar. (Honda.F1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Honda.F1 »</TD></TR><TR><TD CLASS="quote">"He even 'explained' in his sig he accutally isn't a trial member, and how many posts he had before; like people give a ****.
</TD></TR></TABLE>
To you, oh dumb one, when I had 2 posts everyone was calling me a n00b and people were surprised how much information I had for being a n00b. Had to clarify. If you don't give a ****, good for you, you can go back to the rock your crawled from. I didn't place it there so people can care, just for clarification.
</TD></TR></TABLE>
To you, oh dumb one, when I had 2 posts everyone was calling me a n00b and people were surprised how much information I had for being a n00b. Had to clarify. If you don't give a ****, good for you, you can go back to the rock your crawled from. I didn't place it there so people can care, just for clarification.
#14
Thread Starter
Join Date: Jun 2004
Location: Crescent City, CA, USA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good How-To for installing a Strut bar. (Dimi)
If I loosen the bolts, will the pressure from the shocks/springs be dangerous? Should I have my car up in the air, like on a lift type of thing they have in auto shops? Sorry, my n00b-ness is tough.....
#15
Honda-Tech Member
Join Date: Jan 2002
Location: Raleigh, NC
Posts: 15,334
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good How-To for installing a Strut bar. (Sethypoo)
Just leave the car sitting on the ground. The shocks will be held down by the weight of the car and you'll be fine. No problems unless you don't bolt the shocks back up and decide to go jump the car . If you have any specific problems feel free to PM me.
#16
Thread Starter
Join Date: Jun 2004
Location: Crescent City, CA, USA
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Re: Good How-To for installing a Strut bar. (Ricey McRicerton)
Is there a special amount or torque I need to apply to the bolts for the installation of a front strut bar?
#18
just make sure you line the strut car up and see what bolts that you have to undo. Its really problly the eaiest "mod" you can do
Don't loosen the nut that is threaded on the shock rod, undo the 2 beside it (if you have that style).
Don't loosen the nut that is threaded on the shock rod, undo the 2 beside it (if you have that style).
Thread
Thread Starter
Forum
Replies
Last Post
Bad_dude
Honda Accord (1990 - 2002)
2
03-09-2012 04:07 AM
apalmucci
Honda Civic / Del Sol (1992 - 2000)
22
03-23-2011 01:36 AM