Glovebox handle broken off, anyway to pry open or something?
06-12-2006, 11:14 AM
#1
Member
Thread Starter
Join Date: Sep 2002
Location: CA
Posts: 4,212
Likes: 0
Received 0 Likes
on
0 Posts
Glovebox handle broken off, anyway to pry open or something?
So i broke my gf's glovebox handle off from her 92 4 door DX Civic sedan, now the glove won't open. Is there a way i can open the damn thing? There are very important documents in there, i tried putting the glovebox handle back, but i think the mechanism broke as well.
06-12-2006, 11:24 AM
#3
Member
Thread Starter
Join Date: Sep 2002
Location: CA
Posts: 4,212
Likes: 0
Received 0 Likes
on
0 Posts
Re: Glovebox handle broken off, anyway to pry open or something? (melsers)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by melsers »</TD></TR><TR><TD CLASS="quote">i think you can unscrew the hinges off the bottom</TD></TR></TABLE> okay i'll try that... any one got any other ideas?
06-12-2006, 11:52 AM
#4
Honda-Tech Member
Re: Glovebox handle broken off, anyway to pry open or something? (N1NjA TuRtLE)
One of those should work.
If you want to keep it in tack try bracking the switch until you see the little lever then try flipping it.
06-12-2006, 12:23 PM
#7
Unceasing Measure
Re: Glovebox handle broken off, anyway to pry open or something? (Luserkid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Luserkid »</TD></TR><TR><TD CLASS="quote">If you want to keep it in tack try bracking the switch until you see the little lever then try flipping it. </TD></TR></TABLE>
Intact
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by N1NjA TuRtLE »</TD></TR><TR><TD CLASS="quote">so pry it open?</TD></TR></TABLE>
Take the hinge screws out. If you can't, use a drill to get through the area around the handle until you can grab the actuator with pliars and open it. This is not rocket science, kid.
Intact
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by N1NjA TuRtLE »</TD></TR><TR><TD CLASS="quote">so pry it open?</TD></TR></TABLE>
Take the hinge screws out. If you can't, use a drill to get through the area around the handle until you can grab the actuator with pliars and open it. This is not rocket science, kid.
Thread
Thread Starter
Forum
Replies
Last Post
