G.Sanchez

@joey1320
I'm actually focusing on one thing only at a time. Jumping around didn't work at all. Thanks for the tip

@95accord
Idk I guess we wait and see

Since I'm done with bay and front undercoating I'm get the suspension all painted and put it back after I spray the bay. Stick around for more updates.

G.Sanchez

Some updates after so long. Inside its already sprayed. In progress of brake tuck. Next finish engine bay and start putting everything together.

G.Sanchez

Brake tuck all done. Primer all done. Now wait and wet sand and than paint and hope comes out wet.

hondacurious

What and how are you doing the paint. I did ppg epoxy primer over filler then eastwood surfacer on entire car and bay. Sanded smooth with 400 and just need to clean and make booth. I bought spi clear coat but haven't decided on base. Was thinking restoration shop. Not going hok since this will be auto cross car and I know I'll hit cones. Just wondering. Been prepping for maybe a year and don't want to mess up when it's time to shoot

G.Sanchez

I'm using all PPG brand from primer to clear. Make sure you clean surface with wax/grease remover works great.

G.Sanchez

More updates




Bay is all painted and ready to put it back together.



















Interior is almost back together. I just gotta do wiring for my switch panel. After that it should be done.
Working on engine harness at the moment so more pics coming of the harness.

sr20paisa

sub'd

G.Sanchez

.

Welp finally more updates. B16 tranny is all ready to slap on the b18 but b18 ain't ready just yet. Dropped motor of DA today and will be getting the motor ready tommrow.

G.Sanchez

UPDATES






Competition Clutch 8lbs flywheel installed with rear main seal too.








Competition Clutch torqued down already and ready to slap tranny on.

G.Sanchez

I forgot to mention this but my head ended having a bent valve and a bad valve guide. Was Gonna get it fixed but not worth it and that's when the b16 tranny came in for a good I couldn't say no. Well that's how I ended up going b series.

WhiteEh2

Keep up the good work.

G.Sanchez

The car is coming along good but for the mean time I'm helping my cousin do a RHD to his eg hatch. My time is going there for now but tonight I will put updates and pictures of Coco.

G.Sanchez

It's ready to go in finally. Just need to find the damn driver side motor mounts. 🤔

wek'lude

Good stuff! Glad to see a coupe getting built over the masses of hatchbacks.

G.Sanchez

Thanks.
Updates:




Since I'm going b series I have to redone my harness to fit the motor. One side semi done and other side is in progress. Engine harness to should be done this coming week.





A pic of my wiring to the injectors.

G.Sanchez

This is my harness I already had finish for the Mini Me.



Injectors, alternator, Oil pressure.








When it was all done and ready to go.

G.Sanchez

Finally both sides all routes and loomed. Now just finish the wiring to the shock connectors.











Top view of the engine harness.

G.Sanchez

Going in!





It's in.





But sideways because driver side mount is not the right one. 😥

G.Sanchez

Now it's in with the right mount. Just need to wait on my t bracket and start putting axles and etc in.😍

G.Sanchez

Almost ready to fire up.





Need to finish up my fender exhaust exit and I talk radiator.

G.Sanchez

I was gonna order a half size aluminum but i ended up using my full size radiator and just relocated the original brackets.





Top view of engine.

tony_2018

Use what you got dude.

averyvm

iTrader: (1)

Wire tuck looks really good btw.
What connectors did you use on this side of the harness?