hylaxrng

b16a2 fresh rebuilt head instlaled tried geting fuel pressure before start, i have a bul fuel rail its leaking/spraying from banjo bolt just small spray and leakage, but still leakage.
what type of washer and what materiel do i use for replacements.

also do i line up the holes to the banjo bolt and the rail?!?!
banjo has two prongs sticking off of it.



Uploaded with ImageShack.us

JDMswagSerf

Those use copper washers
What prongs are you talking about?
Or are you referring to the two ports on the banjo bolt??

Those don't line up with the hose, the end of the hose is open all around so regardless the banjo bolt position, it will get fuel,
Get the copper washers and tighten it up
Or torque it
11 lb/tq

B_Swapped93

you're probably missing the washer the prongs you're talking about are just a guide line of where to line up the bolt to rail's end.