freeze plug help integra
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: Supermoto, NY
Posts: 6,406
Likes: 0
Received 0 Likes
on
0 Posts
freeze plug help integra
Hey guys i'm trying to figure what size freeze plug i need to get for the back of my ls vtec where the black box was. I couldnt find one solid answer , with people claiming i need anywhere from a 34.3 - 35mm. I have tried a 34.3 which was too small and a 35 which was too big. I cant find anyplace local that has a plug inbetween those two sizes. Anybody know what the ls block takes for sure?
Also, would you guys install this with hondabond or somethign to make sure it stays put and doesnt leak?
Modified by type Gendy at 2:33 PM 11/26/2007
Also, would you guys install this with hondabond or somethign to make sure it stays put and doesnt leak?
Modified by type Gendy at 2:33 PM 11/26/2007
Trending Topics
#12
Re: (type Gendy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by type Gendy »</TD></TR><TR><TD CLASS="quote">didtn think to check in there, i have 2-3 of them but none for an integra</TD></TR></TABLE>
i checked my DA integra manual and found jack. Do you have a vernier?
i checked my DA integra manual and found jack. Do you have a vernier?
#13
Re: (FastAsleep)
also... maybe this is a last resort option but: http://www.rpmmachine.com/freezeplugsindex.shtml
#15
Honda-Tech Member
There ARE times where the hole is too large for the 34.3 plug - I talked to Earl and he uses 35mm plugs regularly (pounded).
Already told this to the OP ~ just posting for reference
Already told this to the OP ~ just posting for reference
#17
Re: (pdiggitydogg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pdiggitydogg »</TD></TR><TR><TD CLASS="quote">There ARE times where the hole is too large for the 34.3 plug - I talked to Earl and he uses 35mm plugs regularly (pounded).
Already told this to the OP ~ just posting for reference</TD></TR></TABLE>
the OP starts off by saying that he has tried both.
Already told this to the OP ~ just posting for reference</TD></TR></TABLE>
the OP starts off by saying that he has tried both.
#18
Honda-Tech Member
Yes, I read... I talked with him, as stated.
35mm has to be used.
Freeze the plug, heat the block w/ a torch - it will fit if 34.3 is too small.
[unsubscribing from thread]
35mm has to be used.
Freeze the plug, heat the block w/ a torch - it will fit if 34.3 is too small.
[unsubscribing from thread]
Thread
Thread Starter
Forum
Replies
Last Post
TurbothisLS
Forced Induction
9
09-22-2002 11:25 AM