feeler gauge???
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2007
Location: Ellicott, Maryland, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
feeler gauge???
Need to know what size feeler gauge to use to check if there is warpage on the block and the head for a b16a2. Rebuilding a si that was stolen and the head gasket blowen, just wanna make sure that the head and block isnt warped, thanks...
#3
Honda-Tech Member
Thread Starter
Join Date: Nov 2007
Location: Ellicott, Maryland, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: feeler gauge??? (Dramier)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dramier »</TD></TR><TR><TD CLASS="quote">You don't use a feeler gauge, you use a straight edge.
</TD></TR></TABLE>
yeah thanks, but i already know that, i have to use that with a feeler gauge. to make sure if the head is not warped and the block
</TD></TR></TABLE>
yeah thanks, but i already know that, i have to use that with a feeler gauge. to make sure if the head is not warped and the block
#4
Honda-Tech Member
Join Date: Aug 2002
Location: Denton, TX
Posts: 2,150
Likes: 0
Received 0 Likes
on
0 Posts
Re: feeler gauge??? (DinDinh04)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DinDinh04 »</TD></TR><TR><TD CLASS="quote">
yeah thanks, but i already know that, i have to use that with a feeler gauge. to make sure if the head is not warped and the block </TD></TR></TABLE>
LOL... sorry, I'm so used to dealing with.... less experienced folks, that I sometimes forget there are people on here who do have some..
You are looking for less than 0.05mm warpage.
Anything between 0.05mm and .2mm needs to be resurfaced, and anything above .2mm is straight jacked y0!
Anyway hope that helps.
Oh, and just in case you don't have a metric set lying around:
0.05mm = 0.002 inches
0.20mm = 0.008 inches
My source is a Honda FSM for a 95 Civic series. Let me know if you have any other questions and I'll do my best to help.
yeah thanks, but i already know that, i have to use that with a feeler gauge. to make sure if the head is not warped and the block </TD></TR></TABLE>
LOL... sorry, I'm so used to dealing with.... less experienced folks, that I sometimes forget there are people on here who do have some..
You are looking for less than 0.05mm warpage.
Anything between 0.05mm and .2mm needs to be resurfaced, and anything above .2mm is straight jacked y0!
Anyway hope that helps.
Oh, and just in case you don't have a metric set lying around:
0.05mm = 0.002 inches
0.20mm = 0.008 inches
My source is a Honda FSM for a 95 Civic series. Let me know if you have any other questions and I'll do my best to help.
#5
Honda-Tech Member
Thread Starter
Join Date: Nov 2007
Location: Ellicott, Maryland, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: feeler gauge??? (Dramier)
OMG, thanks alot!!! just got done cheacking the head and the block, and its perfect!!! thank u so much for the help man u are my new buddie lol
#6
Honda-Tech Member
Join Date: Aug 2002
Location: Denton, TX
Posts: 2,150
Likes: 0
Received 0 Likes
on
0 Posts
Re: feeler gauge??? (DinDinh04)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DinDinh04 »</TD></TR><TR><TD CLASS="quote">OMG, thanks alot!!! just got done cheacking the head and the block, and its perfect!!! thank u so much for the help man u are my new buddie lol</TD></TR></TABLE>
LOL... Cool. Glad it wasn't warped.
We usually send heads to a machine shop to get surfaced even if they aren't warped just to get a nice clean mating surface... Shouldn't cost much and it's worth it IMO.
LOL... Cool. Glad it wasn't warped.
We usually send heads to a machine shop to get surfaced even if they aren't warped just to get a nice clean mating surface... Shouldn't cost much and it's worth it IMO.
Trending Topics
#8
Honda-Tech Member
Join Date: Aug 2002
Location: Denton, TX
Posts: 2,150
Likes: 0
Received 0 Likes
on
0 Posts
Re: feeler gauge??? (z6hatchboy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by z6hatchboy »</TD></TR><TR><TD CLASS="quote">just for price concerns, it cost me $20 to get my head milled/shaved at a local shop.</TD></TR></TABLE>
Cool, glad somebody has a price. Mine cost me a sixpack of MGD, so that doesn't really translate well..
Cool, glad somebody has a price. Mine cost me a sixpack of MGD, so that doesn't really translate well..
#9
Honda-Tech Member
Thread Starter
Join Date: Nov 2007
Location: Ellicott, Maryland, USA
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Re: feeler gauge??? (z6hatchboy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by z6hatchboy »</TD></TR><TR><TD CLASS="quote">just for price concerns, it cost me $20 to get my head milled/shaved at a local shop.</TD></TR></TABLE>
yeah same here but , if i dont have to why waste $20 bucks for nothing if everything is still good? And I would have to get a thicker headgasket, I think?
yeah same here but , if i dont have to why waste $20 bucks for nothing if everything is still good? And I would have to get a thicker headgasket, I think?
Thread
Thread Starter
Forum
Replies
Last Post