EK sides on EG (How to)
03-10-2002, 11:01 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2001
Location: CA
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
EK sides on EG (How to)
sup guys alot of people are askin how i did this so here you go hope this helps.
first you have to cut the front of the EK sides about 2inches. (sorry dont have any before or after pictures) just cut it the same length and the EG ones.
then put those white clips onto the EK sides and then see where it lines up with the chassis (mine already has the square holes there cuz i drilled it already) to get the square holes i just drilled a big hole with a drill, then got a square file and just filed it to the right size square.
I didnt do all of them got lazy but if you see two holes on the picture the one on the left is the one i drilled !!!(dont try to make a hole for the first one in the front cuz there is something behind it and i couldnt get my filer in there.)!!!
this picture show the white clips in the holes for the EK ones
it should fit in after all this and the front will flare out a little so push the sides in and just use a selftappin screw to hold it in. also on the bottom the very far rear clip should clip in. if you want all the clips in there you have to drill holes on the EK sides so it will line up with the holes already there and then use those clips that came off of the bottom (those black screw type things)
Your done!!!!
hope this help those of you that wanted to know how i got it on. there must be other ways but this worked for me. some may say its "mickey moused" but it works and looks fine.
[Modified by JKim0901, 11:02 PM 9/12/2002]
first you have to cut the front of the EK sides about 2inches. (sorry dont have any before or after pictures) just cut it the same length and the EG ones.
then put those white clips onto the EK sides and then see where it lines up with the chassis (mine already has the square holes there cuz i drilled it already) to get the square holes i just drilled a big hole with a drill, then got a square file and just filed it to the right size square.
I didnt do all of them got lazy but if you see two holes on the picture the one on the left is the one i drilled !!!(dont try to make a hole for the first one in the front cuz there is something behind it and i couldnt get my filer in there.)!!!
this picture show the white clips in the holes for the EK ones
it should fit in after all this and the front will flare out a little so push the sides in and just use a selftappin screw to hold it in. also on the bottom the very far rear clip should clip in. if you want all the clips in there you have to drill holes on the EK sides so it will line up with the holes already there and then use those clips that came off of the bottom (those black screw type things)
Your done!!!!
hope this help those of you that wanted to know how i got it on. there must be other ways but this worked for me. some may say its "mickey moused" but it works and looks fine.
[Modified by JKim0901, 11:02 PM 9/12/2002]
thanks for the info...btw what paint did you use to paint them black?
:
Trending Topics
03-10-2002, 01:47 PM
#9
Junior Member
Join Date: Dec 2001
Location: If you want to destroy my sweater.
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sides on EG (fr0stee tr00per)
from my knowledge...eg sides are straight and flat....ek sides have that lip at the very end that flair outwards a bit...
03-10-2002, 11:44 PM
#14
Join Date: Dec 2001
Location: Cerritos, ca, usa
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sides on EG (EH2_Hatch)
nice pics....well..product of boredom? ha ha..jus messing. Well since i have type r side skirts just takin up space in my garage i think ill fit them on my corolla..hahahah...
+ + + + = one drunk korean
+ + + + = one drunk korean
03-11-2002, 06:44 AM
#15
Join Date: Oct 2001
Location: nj, USA
Posts: 499
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sides on EG (AE86owner)
nice! I've always heard about this, but never seen it. Looks great. I like SIINSI's mudflap suggestion.
I'd say step 1 should be to get them painted.
I'd say step 1 should be to get them painted.
03-11-2002, 01:58 PM
#16
Honda-Tech Member
Join Date: Nov 2001
Location: Germantown, MD, USA
Posts: 2,004
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sides on EG (Rezon)
**** 
lol i messed up i knew they came black i was talking about your rims what paint did you use to paint your rims black....sorry bout that
lol i messed up i knew they came black i was talking about your rims what paint did you use to paint your rims black....sorry bout that
03-11-2002, 02:14 PM
#18
Junior Member
Join Date: Dec 2001
Location: If you want to destroy my sweater.
Posts: 452
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sides on EG (DesiEg)
DesiEg...hey i am EH2_hatch's close friend...and he used regular flat black paint...he KIND of sanded it and just painted it...it turned out great in my opinion...
AE8whateverOWENER:...hey punk...dont even try to mount that ish on ur car...its too pretty to be on your car anyways...what do you think your car is...corolla type r?...haha...JK...thanks for taking care of my sides skirts...!
AE8whateverOWENER:...hey punk...dont even try to mount that ish on ur car...its too pretty to be on your car anyways...what do you think your car is...corolla type r?...haha...JK...thanks for taking care of my sides skirts...!
03-11-2002, 10:49 PM
#20
Join Date: Dec 2001
Location: Cerritos, ca, usa
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sides on EG (ImportHatch)
to late..type r side skirts mounted on my ae86..pics are coming soon!
The rims wernt sanded. Jus make sure to clean them real good with good brush with just water.
Then give them one coat of primer , and 2 coats of flat black paint.
The rims wernt sanded. Jus make sure to clean them real good with good brush with just water.
Then give them one coat of primer , and 2 coats of flat black paint.
03-12-2002, 06:29 AM
#22
Banned
Join Date: Nov 2000
Location: HTown, TX, US
Posts: 921
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sides on EG (EH2_Hatch)
I really dont like how it is open at the front of the wheel there. That will trap dirt/gunk and collect water, which could cause rust.
If there was a way to close that off, maybe.
If there was a way to close that off, maybe.
03-14-2002, 10:30 AM
#24
Junior Member
Thread Starter
Join Date: Dec 2001
Location: CA
Posts: 949
Likes: 0
Received 0 Likes
on
0 Posts
Re: EK sides on EG (Cashis EG8)
.
I know what you mean but you cant drills holes on the sideskirt for the white clips. I never really liked the idea of drilling holes on the car either but I dont think it would make that much of a difference
Would it be possible to drill holes on the sideskirts instead of the car? I never really liked drilling holes in my car 
