Driving with too much oil?
#26
Honda-Tech Member
Join Date: Apr 2002
Location: Bad Newz Kennels
Posts: 2,156
Likes: 0
Received 0 Likes
on
0 Posts
#27
Honda-Tech Member
Join Date: Aug 2009
Location: Baton Rouge,Louisiana
Posts: 7,635
Likes: 0
Received 3 Likes
on
3 Posts
Re: Driving with too much oil?
My experience is coming out from work @ 2:00AM -- having a dead slug on startup -- followed by running around town, looking for an all-night parts store on 3 cylinders. LoL!
Matter of fact, that's how I discovered the Champs!
Autozone was out-of-stock on the NGKs I needed...
Anyway, the larger point is... I'll take copper-core plugs any day!
Matter of fact, that's how I discovered the Champs!
Autozone was out-of-stock on the NGKs I needed...
Anyway, the larger point is... I'll take copper-core plugs any day!
#28
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: Dallas, Tx
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: Driving with too much oil?
Check your timing, if you'd like to invest in a tuning service, i offer a good "tuned" service if you have a chipped ecu, that might be able to help you pick up some "pep", after you figure out what your problem is.
I'd replace the wires with some good NGK Blues, get you a set of "Real" spark plugs, get some copper NGK v powers, none of this iridium or anything like that, and get a timing light and just double check your timing..
you may not be looking for power, but you might want to invest in a good exhaust system, and remove the stock cat and go with something little more free flowing, of course, i promise you, once your motor can breath, it'll open up a whole new world.
If you need anymore help or want to inquire about my tuning service - pm me for my number i'll be glad to help you out.
I'd replace the wires with some good NGK Blues, get you a set of "Real" spark plugs, get some copper NGK v powers, none of this iridium or anything like that, and get a timing light and just double check your timing..
you may not be looking for power, but you might want to invest in a good exhaust system, and remove the stock cat and go with something little more free flowing, of course, i promise you, once your motor can breath, it'll open up a whole new world.
If you need anymore help or want to inquire about my tuning service - pm me for my number i'll be glad to help you out.
Interesting comments!
On overfilling motor OIL: I don't think overfilling the oil (by a quart) is going to hurt anything either.
More than likely "driving like ***" (his words, not mine) did the deed!
On the CAT: I lost a dissy in April, and blew out my cat (in the process). LoL! Looked like the 4th of July behind my car. I thought I had an electrical fire.
I replaced the stock Si cat with a MagnaFlow 22630 (OEM flanges, e.g. bolt-on). Man, I can't believe the difference. My B16A2 has a lot more power, and it sounds 'throatier' too!
I think the stock cat must have been bad for a while. The screens were melted. That didn't happen when I lost the dissy. It was probably fried/plugged and the backfiring from my dissy coming apart finished the job.
You need all the help you can get @8,200 RPM. Intake restriction is much worse than exhaust restriction. Heh! That's why they put the butterfly valve on the intake, not the exhaust. But, exhaust restriction will definitely make your ride feel laggy!
On the PLUGS: I agree with you. I ran NGK V-Powers for about 3 years. They were okay, but they only lasted about 15K (in my experience) before I'd foul one and trigger a CEL.
I'm been running Champion Copper Plus (318) RC12MC-4 plugs (MC stands for motorcycle) for about 7 years now - in both D16Y5 (HX) and B16A2 (Si) motors - and they work great! I've gotten lazy and run them for 50K with no fouling.
Anyway, carry on...
On overfilling motor OIL: I don't think overfilling the oil (by a quart) is going to hurt anything either.
More than likely "driving like ***" (his words, not mine) did the deed!
On the CAT: I lost a dissy in April, and blew out my cat (in the process). LoL! Looked like the 4th of July behind my car. I thought I had an electrical fire.
I replaced the stock Si cat with a MagnaFlow 22630 (OEM flanges, e.g. bolt-on). Man, I can't believe the difference. My B16A2 has a lot more power, and it sounds 'throatier' too!
I think the stock cat must have been bad for a while. The screens were melted. That didn't happen when I lost the dissy. It was probably fried/plugged and the backfiring from my dissy coming apart finished the job.
You need all the help you can get @8,200 RPM. Intake restriction is much worse than exhaust restriction. Heh! That's why they put the butterfly valve on the intake, not the exhaust. But, exhaust restriction will definitely make your ride feel laggy!
On the PLUGS: I agree with you. I ran NGK V-Powers for about 3 years. They were okay, but they only lasted about 15K (in my experience) before I'd foul one and trigger a CEL.
I'm been running Champion Copper Plus (318) RC12MC-4 plugs (MC stands for motorcycle) for about 7 years now - in both D16Y5 (HX) and B16A2 (Si) motors - and they work great! I've gotten lazy and run them for 50K with no fouling.
Anyway, carry on...
When you say "NGK V-power coppers", you're just referring to the regular V-power plugs that run like $2-3 a piece, right? From my understanding, all the NGK plugs are constructed with copper cores though?
#29
HT White Ops
Re: Driving with too much oil?
I bought mine on Amazon.com -- if you can believe that. It was on my doorstep in 3 days.
B16A2's use a diifferent cat than D-series. My O2 bung is in the center of the cat. Because of that, the cost was $193. I *think* D-16 cats are around $150 (if I remember correctly).
Locally, they wanted considerably more than $193 for my Si Magnaflow cat, so whatever you decide to get... online shopping is the way to go!
Sorry, I wasn't thread-crapping!
#30
HT White Ops
Re: Driving with too much oil?
Example: http://www.nology.com/silver.html
Copper is a close second... and I've had great luck with them... NGKs aside.
Last edited by BlackDeuceCoupe; 06-14-2010 at 11:56 PM. Reason: ADDED LINKAGE
#31
Honda-Tech Member
Re: Driving with too much oil?
back to the op.
a friend put a gallon too much oil in a 88 civic of mine. it ran weakly, fouled plugs, and smoked A LOT. He put a few hundred miles on the car like that and it was fine.
make sure your plugs are chocolate brown, black means fouled.
adjust your valves too, if you're at 60'000mi and no real maintenance.
your car is in no danger, nothing serious is going to happen and destroy your motor... now on the other hand if you were looooowwwww on oil.... bad things.
a friend put a gallon too much oil in a 88 civic of mine. it ran weakly, fouled plugs, and smoked A LOT. He put a few hundred miles on the car like that and it was fine.
make sure your plugs are chocolate brown, black means fouled.
adjust your valves too, if you're at 60'000mi and no real maintenance.
your car is in no danger, nothing serious is going to happen and destroy your motor... now on the other hand if you were looooowwwww on oil.... bad things.
#32
Honda-Tech Member
Join Date: Mar 2007
Location: suffolk
Posts: 1,776
Likes: 0
Received 0 Likes
on
0 Posts
Re: Driving with too much oil?
i put 4 qts in my b18c1 and its over full
been driving it in vtec
smells like its rich or burnin oil
it does need a tune
i have ek9 cams
been driving it in vtec
smells like its rich or burnin oil
it does need a tune
i have ek9 cams
#33
Honda-Tech Member
Re: Driving with too much oil?
incorrect. your engine is absolutely in danger of increased wear and potentially catastrophic failure if you overfill the engine oil. the crankshaft whips the extra oil in the pan into a foam which is then pushed through oil pump. air is added to the oil and it changes it's viscosity which in turn prevents it from lubricating properly. this results in increased wear (specifically of the rod and main bearings), lower fuel economy, and higher engine temperatures.
#34
Honda-Tech Member
Join Date: May 2010
Location: ny, south of buffalo
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Re: Driving with too much oil?
back to the op.
a friend put a gallon too much oil in a 88 civic of mine. it ran weakly, fouled plugs, and smoked A LOT. He put a few hundred miles on the car like that and it was fine.
make sure your plugs are chocolate brown, black means fouled.
adjust your valves too, if you're at 60'000mi and no real maintenance.
your car is in no danger, nothing serious is going to happen and destroy your motor... now on the other hand if you were looooowwwww on oil.... bad things.
a friend put a gallon too much oil in a 88 civic of mine. it ran weakly, fouled plugs, and smoked A LOT. He put a few hundred miles on the car like that and it was fine.
make sure your plugs are chocolate brown, black means fouled.
adjust your valves too, if you're at 60'000mi and no real maintenance.
your car is in no danger, nothing serious is going to happen and destroy your motor... now on the other hand if you were looooowwwww on oil.... bad things.
to much oil can and will damage bearings, rods and piston rings, as well as open up seals and gaskets for leaks. for those who say it wont cause damage either dont know squat about how an engine works or is just plain old ignorant on oil pressure.
too much oil can lead to too much pressure and if their is WAY to much oil it can even hydrolock an engine. ive seen bent rods, thrown bearings, complete seal failures and blown out rings.
if i were you i would do a compression check and make sure your rings are good, while their run a leak down test to check your valves. these dont cost squat to run so you have nothing to lose. definetly do a tune up and check your cat. did the problems start getting worse after the seafoam? seafoam is great stuff but can add to existing problems at times.
either way g/l
adam jeffery
#35
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: Dallas, Tx
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: Driving with too much oil?
I don't think you can go wrong with Magnaflow. I haven't read anything bad about them. Au contraire, everyone (including myself) seems to love them.
I bought mine on Amazon.com -- if you can believe that. It was on my doorstep in 3 days.
B16A2's use a diifferent cat than D-series. My O2 bung is in the center of the cat. Because of that, the cost was $193. I *think* D-16 cats are around $150 (if I remember correctly).
Locally, they wanted considerably more than $193 for my Si Magnaflow cat, so whatever you decide to get... online shopping is the way to go!
My bad! I must have misread your post.
Sorry, I wasn't thread-crapping!
I bought mine on Amazon.com -- if you can believe that. It was on my doorstep in 3 days.
B16A2's use a diifferent cat than D-series. My O2 bung is in the center of the cat. Because of that, the cost was $193. I *think* D-16 cats are around $150 (if I remember correctly).
Locally, they wanted considerably more than $193 for my Si Magnaflow cat, so whatever you decide to get... online shopping is the way to go!
My bad! I must have misread your post.
Sorry, I wasn't thread-crapping!
As far as the comment, I know you meant know harm. Just wanted you to know where I was coming from.
#36
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: Dallas, Tx
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: Driving with too much oil?
its actually better to be a little low on oil than a little to much oil.
to much oil can and will damage bearings, rods and piston rings, as well as open up seals and gaskets for leaks. for those who say it wont cause damage either dont know squat about how an engine works or is just plain old ignorant on oil pressure.
too much oil can lead to too much pressure and if their is WAY to much oil it can even hydrolock an engine. ive seen bent rods, thrown bearings, complete seal failures and blown out rings.
if i were you i would do a compression check and make sure your rings are good, while their run a leak down test to check your valves. these dont cost squat to run so you have nothing to lose. definetly do a tune up and check your cat. did the problems start getting worse after the seafoam? seafoam is great stuff but can add to existing problems at times.
either way g/l
adam jeffery
to much oil can and will damage bearings, rods and piston rings, as well as open up seals and gaskets for leaks. for those who say it wont cause damage either dont know squat about how an engine works or is just plain old ignorant on oil pressure.
too much oil can lead to too much pressure and if their is WAY to much oil it can even hydrolock an engine. ive seen bent rods, thrown bearings, complete seal failures and blown out rings.
if i were you i would do a compression check and make sure your rings are good, while their run a leak down test to check your valves. these dont cost squat to run so you have nothing to lose. definetly do a tune up and check your cat. did the problems start getting worse after the seafoam? seafoam is great stuff but can add to existing problems at times.
either way g/l
adam jeffery
#37
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: Dallas, Tx
Posts: 865
Likes: 0
Received 0 Likes
on
0 Posts
Re: Driving with too much oil?
Silver is supposed to be the best, but I've never seen them in real life. LoL!
Example: http://www.nology.com/silver.html
Copper is a close second... and I've had great luck with them... NGKs aside.
Example: http://www.nology.com/silver.html
Copper is a close second... and I've had great luck with them... NGKs aside.
#39
Honda-Tech Member
Join Date: Aug 2009
Location: Baton Rouge,Louisiana
Posts: 7,635
Likes: 0
Received 3 Likes
on
3 Posts
Re: Driving with too much oil?
its actually better to be a little low on oil than a little to much oil.
to much oil can and will damage bearings, rods and piston rings, as well as open up seals and gaskets for leaks. for those who say it wont cause damage either dont know squat about how an engine works or is just plain old ignorant on oil pressure.
too much oil can lead to too much pressure and if their is WAY to much oil it can even hydrolock an engine. ive seen bent rods, thrown bearings, complete seal failures and blown out rings.
if i were you i would do a compression check and make sure your rings are good, while their run a leak down test to check your valves. these dont cost squat to run so you have nothing to lose. definetly do a tune up and check your cat. did the problems start getting worse after the seafoam? seafoam is great stuff but can add to existing problems at times.
either way g/l
adam jeffery
to much oil can and will damage bearings, rods and piston rings, as well as open up seals and gaskets for leaks. for those who say it wont cause damage either dont know squat about how an engine works or is just plain old ignorant on oil pressure.
too much oil can lead to too much pressure and if their is WAY to much oil it can even hydrolock an engine. ive seen bent rods, thrown bearings, complete seal failures and blown out rings.
if i were you i would do a compression check and make sure your rings are good, while their run a leak down test to check your valves. these dont cost squat to run so you have nothing to lose. definetly do a tune up and check your cat. did the problems start getting worse after the seafoam? seafoam is great stuff but can add to existing problems at times.
either way g/l
adam jeffery
#44
B*a*n*n*e*d
Join Date: Mar 2012
Location: BAY AREA KILLA NORCALI
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Re: Driving with too much oil?
Holy thread of mis information. Mods need to lock this up before people start draining and adding oil like mad men lmao. Reality: a LITTLE bit of extra oil (1/4 to 1/2 quart) isnt gona hurt anythin. Now these storys of an extra gallon of oil in this or that is crazy and will definetly cause problems. Attn: MODS PLEASE LOCK THIS THREAD!!! and a b18c takes 4.2 quarts including filter. Check the damn owners manual and look for capacities, its all there in black and white. D16z6 (and most d series) take 3.5 quarts including filter, again from the owners manual (i have a collection). That is all.
#45
Re: Driving with too much oil?
Thank you very much ej! For the proper information! But I have already drained out the exccessive amount of 2 qt.s and now my engine is not smoking as much but I still have a check engine light on! Any ideas?
#47
Re: Driving with too much oil?
Reset the ECU. A quart of oil over is not the end of the world, just drain it when you catch it. Just don't run a quart over all the time and you will fine. As for the other problems could be more of a coincidence.
#48
B*a*n*n*e*d
Join Date: Mar 2012
Location: BAY AREA KILLA NORCALI
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Re: Driving with too much oil?
Do what jbpnoman and motegicivic said and report back to us. Good luck man and no prob on the info. Its what this sites here for lol.
Thread
Thread Starter
Forum
Replies
Last Post
bad, car, civic, crv, effects, honda, misinformation, motorcycle, oil, overfill, overfilled, put, slugish, tech, wrong