EK9Tune

Well, a couple of friends were talking about the Ding King commercial cus I brung up th dents on my car. I was wondering does that stuff really work? I mean I've heard really good stuff about it especially that its super loud.



Yeah, I've been over this before but I haven't taken it to a shop yet. I have to keep looking for better deals.

Ignore the headlights. I've decided to get JDM taillights & headlights. :] I finally see the light about those clear tail lights. A friend of mines explained all of it to me.

Note: I DID NOT PUT THOSE TAILLIGHTS & HEADLIGHTS IN ON PURPOSE Yes, I'm removing my angel eyes & tail lights.

Luserkid

HAHAHAHAHAHAHAHAHAHAHAHAHAHA LMAO OMFG HAHAHAHAHAHAHAHAHAHAHAHAHA

*cough to clear throat* hmm... sorry. I sell Ding Kings in my store and i dont sell them. Biggest piece of **** ever. For your problem just take it to a shop and have a new quarter panel put on. Or get a slide hammer and have at it.

EK9Tune

Nah, not for that dent I got minor dings the size of a fist on the side of my car. But not as deep.

EdWord

LOL, wasnt there another thread of your trying to get the dent fixed? LOL i cant believe your friend kicked it that hard to make a dent that big LOL

EK9Tune

let's not get started on that subject again haha, it was locked already. we don't need it locked again haha. =]

EdWord

i would say get another new quarter panel

turbociviccoupe

wow

KoLRaNcH

Wow, that was caused by someones foot? lol

Does your friend happen to be Chuck Norris?

Eran

iTrader: (1)

Flat-footed kick, police-raid style. It'll do that sized dent

LOL @ Chuck Norris!

byronl

wow, some friend

NMZ

DING KING? take your car to someplace like mob works and make your friend pay for it along with a new paintjob and rims and new car too

dohcVTECeg2

just buff it out

EH3Civic

I had a friend do something very similar to that, on the same quarter panel...but it wasnt THAT bad of a dent. I too thought about the ding king, and went and bought one. It pulled it most of the way out, and then it just popped in and came out all the time lol. It also MADE 2 pressed dents where its legs are supposed to suction to. In the end, I had that piece of my quarter panel cut out, and a new piece from a "scrap quarter" welded in. Now it looks brand new. That repair, plus more like it, plus paint and all costed $1200 though.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcVTECeg2 &raquo;</TD></TR><TR><TD CLASS="quote">just buff it out </TD></TR></TABLE>

^^^that works too^^^

drktorn

tooooo big of a dent and it looks it has some crease in it to so the paint will chip.

beoy9

I've kicked a quarter panel like that before. It was on a 95 pontiac and my friend hated his car. I couldn't believe how easily it caved in, and it wasn't as big as that EK panel.

SRCivic97

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by luserkid &raquo;</TD></TR><TR><TD CLASS="quote">HAHAHAHAHAHAHAHAHAHAHAHAHAHA LMAO OMFG HAHAHAHAHAHAHAHAHAHAHAHAHA
*cough to clear throat* hmm... sorry. I sell Ding Kings in my store and i dont sell them. Biggest piece of **** ever. For your problem just take it to a shop and have a new quarter panel put on. Or get a slide hammer and have at it.

</TD></TR></TABLE>

Victor I thought you were the Ding King

Screw using a shop, they will rape you. Buy a used panel from HT and call it a day.

9hatch6

i say junk it, f it right? junk it thats what i do

killakoupe

i would put a dent the size of the one on ur car into ur "friends" face!
and ding king will not work.

EK9Tune

ouch, lol man replacing the auto panel isnt easy stuff dude lol. btw you have a suggestion to getting the gasket where the gas goes to close ALL The way? Mines closes but it sticks out about 2 cm. I'm just trying to get my car to look clean again.

Jhonny Ricer

have chuck do it to the other side there slappy there you go prob solved more aerodynamic and the new JDM lol
No ding king was and still is the biggest **** stain on this planet id say have it cut out and the panel rewelded in

bpkmrtoes

you can try one of those big suction cups that is usually sold NEXT to the ding king... just spray some water on there to create a good sticking surface then pull out... it takes some practice... and not always guarenteed to come out perfect... but itll make it look better... lol

EK9Tune

Dang, I really just want to put a new quarter panel but that stuff ain't easy. Unless there was a guide.

Jhonny Ricer

well even if there were a guide ittd be a bitch thats all unibody bud so many welds its not even funny

BlackHXCoupe

Have your friend pay to have this done.

http://www.sportcompactcarweb....rt_3/

EK9Tune

haha, i have no idea what they're really doing at that link.